Варочная панель Simfer H60I19B021 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
20
GB
-It is also possible to use one of the cooking surfaces as a separate keep-
ing warm plate for RHE hobs. Activation/Deactivation will be realized by a
separate button.
RHE hobs (Optional)
2.5 % radiator power is installed by the ED cycle.
The functionality will become active after placement.
Overheating Protection
•As a principle, the induction operates as self-secure, for instance, LIN
master sends the characteristics involving the cooking stage settings. The
induction system decides which settings to realize depending on the in-
ternal system status. In case of a master query, the induction system will
report the current settings and the system status. Induction is defined in
a separate characteristic in LIN communication for Touch-Screen Control.
•Each cooking zone of the induction electronics has temperature sensors
checking the temperature under the glass-ceramic panel. Other tempera-
ture sensors placed throughout the cooling unit is for the electronic com-
ponent to protect itself from overheating.
When the first minimum temperature limit is exceeded, the induction
system reports this information through LIN. The accelerator turns off (if
active). The device realizes the demand extended for turning the accelera
-
tor off and the accelerator is turned off by adjusting the remaining opera-
tion time to 3 seconds. This starts a flashing ‘‘P’’ in the relevant indicators
and indicates that the accelerator demand cannot be temporarily realized.
The accelerator functionality is not re-applicable before permitted by the
LIN data. The accelerator button will be pressed and it will be shown in
the cooking surface indicator as along as the button is kept pressed.
•When overheating is detected and the accelerator function is selected,
the remaining operation time of the accelerator is adjusted to 3 seconds.
Thus, the deactivation of the accelerator can be identified in any case.
Following the completion of the 3 seconds turning-off period, the indicator
of the Device will change from ‘‘P’’ to ‘‘9’’.
•When the second medium temperature limit is surpassed, the induc
-
tion system will reduce the power output to be protected from a further
increase of temperature. The device receives the information over LIN that
a power limitation mode is turned on. The device will show the cooking
