Варочная панель Simfer H60I19B021 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
GB
power button) the control unit will not be turned on.
Since all cooking surface indicators will be ‘‘LOCKED’’ in case the ‘‘Child
Lock Function’’ is activated during ‘‘POWER ON’’, they will show the sign
‘‘L’’. The potential optical warnings for hot cooking surfaces will be shown
in alternation with [L] (H-ON= 0.5 sec.; L-ON = 1.5 sec.).
The Touch-screen control may be turned off if desired by pressing the
‘‘ON/OFF’’ button of the control unit when the device is in ON mode. This
can also be applied for locked control units (active child lock). The ‘‘ON/
OFF’’ button always operates with the ‘‘POWER OFF’’ function in the first
order of priority.
The response time for turning on the control unit is 1 to 1.3 seconds
while it is 0.5 to 0.8 seconds for turning it off.
Automatic Turn-Off
If the cooking surface is not activated or the button for selecting the
function is not pressed, the device will pass on to ‘‘OFF’’ mode from ‘‘ON’’
mode after 20 seconds.
When a cooking surface (with cooking level ‘‘0’’) is selected, the auto-
matic power turn-off time will consist of 10 seconds to undo the selection
and 10 seconds to turn the power off.
Cooking Surface ON/OFF
When the device is turned on, a cooking surface can be selected by
touching the relevant indicator (Selection Sensors). The relevant indicator
transforms into a fixed point and if this is a hot cooking surface, it be
-
comes ‘‘0’’ instead of ‘‘H’’. The point is shown to end in all other cooking
surfaces.
After that a cooking level can be adjusted by using the slider zone. Thus
the relevant cooking surface will be turned on. The ending points will be
‘‘9’’ on the right-hand side and ‘‘0’’ on the left-hand side.
Turning off a Single Cooking Surface:
A single cooking surface may be turned off by selecting the relevant
cooking surface and adjusting the cooking level to [0]. In case of an opti-
cal warning for hot cooking surfaces [H] the indicator point will be shown
