Варочная панель Simfer H60I19B021 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
13
GB
the termination of pause. Possibly, the wrong cooking surface will have
been selected. However, the power will never be higher than the one ini-
tially adjusted by the operator. Identification of container is not possible
during the pause stage with 0% power. The time-out (maximum 10 min
-
utes) counter for a cooking surface without a container will start again, if
previously started.
The timers already programmed (including the egg timer) will be stopped
during pause and will not continue. The automatic heating and accelerator
will also be turned off in all cooking surfaces during activation, the idle
temperature calculation and operation time limitation, on the other hand,
will continue and will not stop.
The LED indicators of other functions (timer, multi-circuits, etc.) will
continue to be illuminated depending on the condition. The pause state
may last for a maximum period of 10 minutes. If this state is not terminat
-
ed during this period, the control will be turned off. The cooking surface
may be turned off as desired with the ON/OFF button. An activated pause
mode will also be presumably terminated.
Terminating the Pause Mode
In order to terminate the pause mode and to reactivate the special func-
tion button and any other button (not the same button), the subject but-
tons should be activated within 10 seconds. This will restart the condition
before the pause mode. In order to activate a second button, the on/off
button may be used by ‘‘mildly tapping’’ (activation time > 300 millisec-
onds and < 1 sec.). If this is activated for at least 1 second, the control
unit will be turned off. If another button is not activated within 10 sec-
onds, the cooking surface will also be turned off.
Additional LED for the Pause Functionality
An optional LED operating as follows may be used for the pause function:
The LED indicator will remain off when the pause function is not ac-
tivated. When the pause function is active, on the other hand, the LED
indicator will be statically illuminated.
The LED indicator will flash throughout the waiting time of a second but
-
ton to terminate the pause function. The LED indicator will also flash if an
