Варочная панель Simfer H60I19B021 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
GB
additional retrieval function is possible following the reactivation.
Retrieval (Optional for the Multi-Function Button)
If the control is turned off from the main switch by mistake, the settings
may be rapidly retrieved by using the retrieval function. Following each
shutdown of the power button, the user will have 6 seconds to turn the
control on again and another 6 seconds to activate the pause button. The
pause mode is not possible within the first 6 seconds after the activation.
This function is only possible if at least one cooking surface is already
activated (cooking stage > 0) and it is confirmed with an audible button
signal independent from the key-lock status.
The following will be reset:
•Cooking stages of all cooking surfaces
•Minute and second information of the timers related to active cooking
zone
•Connection states of external circuits (the external circuit is guaranteed
with the memory function)
•Heating function and accelerator
•The following will not be reset:
•Time limitation counter (the operator interrupted by turning off)
•Task cycle counter (the new cycle will start after turning on again)
•If the power reduction delay time is effective at the time of turn-off
(power management) however the new cooking stage has not been loaded
yet, the retrieval may not reconfigure the last settings of the user (that
should be activated in priority). This special condition may only arise
during the 3 seconds delay time of power reduction.
•Since the induction series without power outlet cannot identify contain
-
ers, the time counter for ‘‘no container’’ will restart after the termination of
the pause mode. After maximum 10 minutes the relevant cooking surface
will stop or pass on to the stop mode.
Idle Temperature
The period during which a cooking surface will contain an idle tempera-
ture that could cause burns in case of contact after operation and turning
off will be calculated and determined.
This will be calculated depending on the following factors:
