Kuppersberg ESO 629 - Инструкция по эксплуатации - Страница 48

48

TECHNICAL PASSPORT

ENGLISH

Electric hobs

PA RT 7.  I F  S O M E T H I N G 

I S  N OT  F U N CT I O N I N G 

P RO P E R LY

Before calling the technical service, 

perform  the  verifications  specified 

below.

The appliance does not operate:

Ensure that the power cable is 

plugged in.

The pot sticks to the glass:

 If there 

is molten material between the pot and 
the glass, set the hot plate to maximum 
power and try to separate them.

Single Sensor Error: 

If any of the 

sensors is active more than 10 seconds, 
this error situation occurs and error 
code ”F1” is showed. This error can be 
related with different roots. One of 
them is that there may be an object 
(fork, knife…) on the any of the sensor.

Make sure that there is no any 

object on the control unit, hob glass is 
wiped with a dry cloth. If error situation 
continue after this solution, please take 
out plug or switch off fuse switch for 
10 second.

Multiple touch button error:

If more than 2 sensors are sensed 

at same time, this error situation occurs 

and error code”F2” is displayed.

Potential root reasons of the 

problem :

Â

There may be an object(pot…) 

or  water  accumulation(overflow  liquid 

from pot…) that cover more than 2 

sensors

Â

Touch control location may 

exposure more heat or steam (from 

oven bottom of the hob…)

Please be sure that there is no any 

object on the sensors and switched off 

all steam and heat sources. Then,hob 

glass is wiped with a dry cloth. If error 

situation continue after this solution, 

please take out plug or switch off fuse 

switch for 10 second.

FC Error:

Fc message on the control and the 

hot plates switch off: Overheating in 

the electronics. Let thestove cool for a 

while. Let the hob cool down for a while.

Please note! 

The following shall not be considered as defects of the Product

Induction and 

electrical panels

Sound of working of induction cooking zones at activation of increased 

power 

Dark, visually non-luminous segment of the thermostat on a glass 

ceramic cooking zone 

Discoloration of desktop surface when using the product