Kuppersberg ESO 629 - Инструкция по эксплуатации - Страница 42

42

TECHNICAL PASSPORT

ENGLISH

Electric hobs

The touch buttons activate the 

controls, and each is linked to a display. 

You do not need to exert force on the 

touch button, you only need to touch it 

with the tip of your fingertip to activate 

the  function.  Each  action  is  verified  by 

a beep. 

SWITCHING THE APPLIANCE ON 1 

Press the on touch button   (1) for 

at east one second. The touch control 

will become activated, you will hear a 

beep and the displays will light up. If 

any surface is hot, the display will flash 

H and 0 alternately.  After power up, 

touch control celibrates itself for 10sec. 

If you do not take any action in the 

next 10 seconds the touch control will 

switch off automatically. 

ACTIVATING THE HOT PLATES 

The hot plates will be deactivated, 

with their respective power displays 

(10) to 0, until a power level is selected. 

If all of the hot plates are at 0, you have 

10 seconds to activate one of them, 

otherwise the touch control will switch 

off automatically. 

Use the touch buttons    and   (4/3) 

to select a power level. If you press the 

touch button   (3), the hot plate will 

change to 1 and the hot plate burner 

display (10) will light up. Keep pressing 

it to increase the power level. You can 

lower the power level using the touch 

button   (4). 

Quick switch-on at maximum power: 

with the hot plate at 0, press the touch 

button    (4) once. The hot plate will 

go straight to 9. If you keep either 

of these two touch buttons   and    

(4/3) pressed down, they will repeat the 

action every half a second, without you 

needing to press them again. 

SWITCHING THE HOT PLATES OFF

Using the touch button (4) lower the 

power to 0. 

The hot plate will switch off 

automatically. Quick switch-off: 

Regardless of the power level, if you 

press touch buttons    and   (4/3), the 

hot plate will switch off immediately. 

RESIDUAL H E AT  D I S P L AY 

The power display will display an 

H when the glass surface reaches a 

temperature that could cause burning. 

When this risk disappears, the display 

switches off (if the appliance is 

disconnected), or displays a 0 (if the 

appliance is still connected). Switch the 

hot plate off before the cooking time 

ends to make the most of the residual 

heat and save on electricity. 

Warning: If while the H is still 

displayed there is a power cut and the 

power returns immediately, the residual 

heat displays will not light up again, 

even though the cooking surfaces are 

still hot. Bear this in mind. 

SWITCHING THE APPLIANCE OFF 

You can disconnect the hot plate at 

any time by pressing the touch button