Варочная панель Korting HI 6450 RI - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
• Error codes:
Error code:
Description:
Possible causes:
Error recovery:
C
The cooking zone can be config-
ured if a static “C” is shown.
It’s not an error, the user is in the
service menu.
A suitably pan must be placed on the
relevant cooking zone.
C/-
The cooking zone will be config-
ured if a blinking “C” is shown.
After a successful configuration
the relevant display shows “-”.
When the “-” is not displayed
please check the possible causes
of the E/5.
The user is in the service menu,
it’s not an error.
Wait for the sysmbol “-” or abort the con-
figuration activities by pressing the select-
key and the “C” does not blink anymore.
E
A blinking “E” on each cooking
zone indicates, that all configs
will be deleted.
The user is in the service menu,
it’s not an error.
Manual configuration.
E/2
Temperature limits are excessed. Electronik temperature to high.
System must cool down.
E/3
Unsuitable pot.
Pot creates on the modul an im-
proper operating point which can
destroy devices, e.g IGBT‘.
1. The error is automaticly cancelled after
8s and the cooking zone can be used
again. In case of further upcoming errors
the pot have to be changed.
E/4
Unconfigured induction modul.
I nduc tion modul is not con-
figured.
1. Delete the hob configuration and acti-
vate the manual configuration.
2. Start the UI service menu to configure
the induction modul.
E/5
No communication between UI
and induction modul.
No power supply of induction
modul.
Contact the technical Service.
E/6
Main power disturbance.
1. Failure in main power fre -
quency detection.
2. Over voltage.
Contact the technical Service.
E/8
Fan failure.
Fan or control electronic is defect. Contact the technical Service.
E/9
Defect T sensor on inductor.
Sensor signal out of valid range;
sensor or electronic is defect.
Contact the technical Service.
E/A
Hardware defect of induction
modul.
Defect hardware device detected
by the self check of the modul.
Contact the technical Service.
E/C
Configuration failure.
2 cooking zones are dedicated to
the same element of the UI.
1. Erase the actual configuration manual
configuration with service menu.
E/H
Fixed sensor value.
-
System must cool down.
ER31/ER47
Control board.
Error in the control board.
Contact the after-sales service.
ER 22
The control board switches off
after 3,5-7,5 seconds.
Error in the control board.
Contact the after-sales service.
ER 03/
The control board switches off
after 10 seconds.
Presence of liquids or pans on the
control area.
Clean the glass-ceramic surface.
ER20
Error in the control board.
Memory error.
Contact the after-sales service.
If he cook
-
ing level is
r e s t o r e d
to 0.
-
Failure on the induction module. Contact the after-sales service.
L
N o e r r o r ! A l l f u n c t i o n s a r e
blocked.
-
Deactivate the key function.
- 33 -
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
