Gorenje Plus GIT95XC - Инструкция по эксплуатации - Страница 31

GB 31

What you need to consider

Safety instructions for the installation

•  The connection must comply with national and local regulations.
•  The appliance must always be earthed.
•  This appliance may only be connected by a competent electrical 

installer.

•  For the connection, use an approved cable (for example type HO7RR) 

in accordance with the regulations. The cable casing should be of 
rubber.

•  The connection cable must hang freely and is not to be fed through a 

drawer.

•  If you want to make a fixed connection, make sure that a multi-polar 

switch with a contact separation of at least 3 mm is fitted in the supply 
line.

•  The worktop the hob is built into must be flat.
•  The walls and the worktop surrounding the appliance must be heat 

resistant up to at least 85 °C. Even though the appliance itself does not 
get hot, the heat of the hot pan could discolour or deform the wall.

•  Damage caused by incorrect connection, installation or use, will not be 

covered by the guarantee.

•  If the connecting cable is damaged, it may only be replaced by the 

manufacturer, the manufacturer’s service organisation or equivalently 
qualified persons, in order to avoid dangerous situations.

Clearance

Sufficient all-round clearance is essential to the safe use of the hob. 
Check that there is enough clearance.

cooker hood

cabinet

side wall

hob

*  GIT63B: min. 65 cm

GIT73B: min. 78 cm

GIT95B: min. 91 cm

GIT95XC: min. 91 cm

INSTALLATION