Candy CI642CBB - Инструкция по эксплуатации - Страница 21

Hints and Tips                                                                                     

Problem

Possible causes

What to do

The cooktop cannot   
Be turned on. 

No power. 
 

Make sure the cooktop is connected to 
the power supply and that it is 
switched on. 
Check whether there is a power 
outage in your home or area. If you’ve 
checked everything and the problem 
persists, call a qualified technician.

The touch controls are 
unresponsive. 
 

The controls are locked. 
 

Unlock the controls. See section 
‘Using your ceramic cooktop’ for 
instructions. 

The touch controls are 
difficult to operate. 

There may be a slight film of 
water over the controls or you 
may be using the tip of your 
finger when touching the 
controls. 

Make sure the touch control area is 
dry and use the ball of your finger 
when touching the controls. 

The glass is being 
scratched. 
 

Rough-edged cookware. 
 
Unsuitable, abrasive scourer or 
cleaning products being used. 

Use cookware with flat and smooth 
bases. See ‘Choosing the right 
cookware’. 
 
See ‘Care and cleaning’. 

Some pans make crackling 
or clicking noises. 
 

This may be caused by the 
construction of your cookware 
(layers of different metals 
vibrating differently). 

This is normal for cookware and 
does not indicate a fault. 
 

The induction hob makes a 
low humming noise when 
used on a high heat setting. 

This is caused by the technology 
of induction cooking. 

This is normal, but the noise should 
quieten down or disappear completely 
when you decrease the heat setting. 

Fan noise coming from the 
induction hob. 

A cooling fan built into your 
induction hob has come on to 
prevent the electronics from 
overheating. It may continue to 
run even after you’ve turned the 
induction hob off. 

This is normal and needs no action. 
Do not switch the power to the 
induction hob off at the wall while the 
fan is running. 

Pans do not become hot 
and appears in the display. 

The induction hob cannot 
detect the pan because it is not 
suitable for induction cooking. 
The induction hob cannot detect the pan 
because it is too small for the cooking 
zone or not properly centered on it. 

Use cookware suitable for induction 
cooking. See section ‘Choosing the 
right cookware’. 
Centre the pan and make sure that its 
base matches the size of the cooking 
zone. 

The induction hob or a 
cooking zone has turned 
itself off unexpectedly, a 
tone sounds and an error 
code is displayed (typically 
alternating with one or two 
digits in the cooking timer 
display). 

Technical fault. 
 

Please note down the error 
letters and numbers, switch 
the power to the induction hob 
off at the wall, and contact a 
qualified technician. 
 

21