VITEK VT-1764 BK - Инструкция по эксплуатации - Страница 5

5

              ENGLISH         

preliminary heated up; it disinfects wa-
ter and provides its easy evaporation.

Note: 
-  switching on this function can to 

some extent change the indications 
of the room temperature (27) and 
humidity (28) on the display (7). 

8.  You can set up operation time of the 

unit using the (2) “Timer” button. Press 
the button (2) to set the required opera-
tion time of the unit from 1 to 12 hours, 
it will be reflected on the display (7) by 
corresponding digit indication (24).

9.  Use the (3) steam “Max/Min” button to 

set the required intensity, it will be re-
flected on the display (7) by the chang-
ing indication (26).

Note: 
-   if the unit operates in the automatic 

humidity maintenance mode, steam 
intensity control will be performed 
automatically.

10.To switch on the automatic humid-

ity maintenance mode, press the (4) 
“Humidity” button, the “Setup” symbol 
will be flashing on the display, press 
the button (4) again to set the required 
humidity in the room (from 45 to 90%, 
setting step is 5%). In the automat-
ic humidity maintenance mode the 
“Setup” symbol will be flashing on the 
display (7), temperature (27), humid-
ity (28) and steam intensity (26) will be 
displayed. To view the preset humidity 
value, press the (4) “Humidity” button, 
the preset humidity value will be flash-
ing on the display (7), in 5 seconds the 
information on the display will return to 
the previous mode.

  To switch off the automatic humid-

ity maintenance mode, press the (4) 

“Humidity” button several times, when 
humidity value reaches 90%, the 
“Setup” symbol will go out.

11.When you want to stop the work of the 

unit, switch off the unit, by pressing the 
(5) “Power” button, the indication (21) 
will appear on the display (7), the room 
temperature (27) and humidity (28) will 
be displayed.

12.When the water tank becomes empty 

(11), the humidifier will switch off au-
tomatically, the indication (23) will light 
up on the display (7) and you will hear 
sound signals.

Note:
Water tank backlight (18) will help you 
estimate water quantity in the tank.

REMOTE CONTROL (19)

For convenient control of the unit, use the 
remote control.
If there is an isolation insert in the battery 
compartment, remove it, if the battery is 
supplied separately, remove the holder of 
the battery, by preliminary pressing the 
clamp, insert the battery in the holder, 
strictly following the polarity, insert the 
battery holder  into the remote control. 

Correspondence of the remote control 
buttons to the buttons on the control 
panel of the unit:

29. “Power” on/off button (5). 
30. “Ozone” mode on/off button (6).
31. “Heating” mode on/off button (1).
32. “Timer” setting button (2).
33. “Humidity” setting button (4).
34. Steam intensity setting button - “Max/

Min” (3).

CLEANING AND CARE

Warning: Always switch off and unplug 
the unit before cleaning it.

1764.indd   5

1764.indd   5

04.06.2010   14:11:17

04.06.2010   14:11:17