Увлажнители Philips HU4816/10 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
EN
English
Setting the timer
With the timer function, you can let the
humidifier operate for a set number of
hours. When the set time has elapsed,
the humidifier automatically switches
off.
1
Press the timer button to enable
the timer function (fig.
l
).
»
The corresponding timer light
(
1H
,
4H
or
8H
) goes on.
2
To deactivate the timer function,
press the timer button repeatedly
until the timer light (
1H
,
4H
or
8H
)
turns off.
Setting the humidity level
Note
•
Make sure that the water tank is filled
with water before the humidifier
can function (see the chapter
'Getting started', section 'Prepare for
humidification').
1
Press the humidity button once
or more times to set the desired
air humidity to 40%RH, 50%RH or
60%RH (fig.
m
).
»
The humidity light (
40
,
50
or
60
)
of the humidity level goes on.
»
The humidity indicator light is red
if the desired humidity level is
not reached. The light turns blue
when the desired humidity level
is reached.
Tip
•
A comfortable humidity level is from
40%RH to 60%RH. You can choose
the preferred humidity level at 40%RH,
50%RH or 60%RH.
Changing the fan speed
Manual
You can manually select the desired fan
speed.
•
Press the speed button once or
more times to select the desired
fan speed ( (low), or (normal) )
(fig.
j
).
The selected fan speed light goes on.
Tip
•
If the desired humidity level is reached,
you can select a lower fan speed.
However, if the desired humidity level is
not reached, you can select a higher fan
speed to humidify the air more quickly.
Sleep mode
In sleep mode, the humidifier operates
quietly with dimmed light for your
undisturbed sleep (fig.
k
).
1
Press the speed button once or
more times to select sleep mode. In
sleep mode, only the speed light
is on.
2
To change to another fan speed,
simply press the speed button
again.
Note
•
Sleep mode only works at speed .
•
In sleep mode, the red indicator does
not blink, but remains on when the
water level gets low.
•
In sleep mode, you can only set the
timer; the humidity level cannot be set,
and the humidity light is off.
