Philips HU4816/10 - Инструкция по эксплуатации - Страница 14

12

EN

Problem

Possible solution

The filter discolors 
after some time.

• 

The deposit is a natural effect of the wick material, and it 
has no impact on humidification performance. Clean the 
humidification filter frequently to remove the scale, and 
replace the humidification filter every 6 months.

There is unpleasant 
smell coming out from 
the humidifier.

• 

Make sure that the water tank is filled with water. 

• 

Clean the humidification filter (see the chapter ‘Clean the 
humidification filter’).

No air comes out of 
the air outlet.

• 

Put the plug of the humidifier into the power socket and 
switch on the humidifier.

I do not see visible 
mist coming out of 
the humidifier. Is it 
working?

• 

When mist is very fine, it is invisible. This humidifier has a 
NanoCloud humidification technology, which produces 
healthy humid air from the outlet area without formation of 
water mist. Therefore, you cannot see the mist.

I want to check 
whether the humidity 
sensor works or not.

• 

Gently blow moist air into the humidity sensor. After a 
while, the humidity indication changes. When the desired 
humidity level is reached, the color of the humidity 
indicator light is blue. When the humidity level is not 
reached, the humidity indicator light is red.

If the humidifier is not 
used for a long time, 
How to store and 
reuse it?

When the humidifier is not used for a long time, bacteria and 
mold may grow on the filters. please follow below steps for 
storage and reuse.

• 

Clean the water tank thoroughly and dry the humidification 
filter before storage.

• 

Check the filters before you start using the humidifier 
again. If the filter is very dirty with dark spots, replace it 
(Please refer to the chapter “Replacing the humidification 
filter” in User manual )