Увлажнители Philips HU4816/10 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
9
EN
English
5 Cleaning your
humidifier
Note
•
Always unplug the humidifier before you
clean it.
•
When pouring water from the water
tank, make sure to pour water from the
opposite side of the air inlets.
•
Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the humidifier.
•
It is normal to have dust inside upper
unit of the appliance after using it for a
while. User cannot clean it by himself.
Please contact local service center for
support.
Cleaning the body of the
humidifier
Regularly clean the inside and outside
of the humidifier to prevent dust from
collecting.
1
Wipe away dust with a soft dry cloth
from the body of the humidifier.
2
Clean the air inlet and the air outlet
with a soft dry cloth.
Cleaning the water tank
Clean the water tank every weeks to
keep it hygienic.
1
Take out the humidification filter
and the filter support.
2
Fill the water tank for 1/3 with water.
3
Add some mild washing-up liquid to
the water in the water tank.
4
Clean the inside of the water tank
with a soft clean cloth.
5
Empty the water tank into a sink.
6
Put the humidification filter and the
filter support back into the water
tank.
Cleaning the
humidification filter
Clean the humidification filter every
week to keep it hygienic.
1
Take out the humidification filter
and the filter support from the
water tank (fig.
n
).
2
Remove the humidification filter
from the filter support (fig.
o
).
3
Soak the humidification filter in
cleansing agent (e.g diluted citric
acid solution) for one hour (fig.
p
).
Note
•
Please use mid or acid cleanser
(24g citric acid with 4L water).
4
Rinse the humidification filter
under a slowly running tap. Do not
squeeze or wring the filter when
cleaning (fig.
q
) .
5
Let excess water drip off the
humidification filter.
6
Assemble the humidification filter
round the filter support (fig.
d
).
7
Put the humidification filter and the
filter support back into the water
tank (fig.
e
).
8
Put the upper unit back onto the
water tank (fig.
g
).
Note
•
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
•
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
