Philips HU4813/11 - Инструкция по эксплуатации - Страница 8

6

EN

Tip

•

If the desired humidity level is reached, the 

humidifier changes to a lower fan speed 

automatically.

•

In 

AUTO

 mode, the fan speed changes between 

and 

.

Manual

You can manually select the desired fan speed.

1 

Press the speed button 

 once or more 

times to select the desired fan speed 

(

AUTO

,   ,   or 

 ) (fig. 

h

).

»

The selected fan speed light goes on.

Tip

•

If the desired humidity level is reached, you can 

select a lower fan speed. However, if the desired 

humidity level is not reached, you can select 

a higher fan speed to humidify the air more 

quickly.

Sleep mode

In sleep mode, the humidifier operates quietly 

with dimmed light for your undisturbed sleep.

1 

Press the speed button 

 once or more 

times to select sleep mode (fig. 

i

). In 

sleep mode, only the speed 

 light is on.

2 

To change to another fan speed, simply 

press the speed button 

 again.

Note

• 

Sleep mode only works at speed  .

• 

In sleep mode, the red indicator does not blink, 

but remains on when the water level gets low.

• 

In sleep mode, you can only set the timer ; the 

humidity level cannot be set, and the humidity 

light is off.

Switch the humidifier on and off

1 

Put the plug of the humidifier into the wall 

socket.

2 

Press the power button 

 to switch on 

the humidifier (fig. 

f

).

»

The current humidity level and fan 

speed display on the screen.

3 

Press the power button 

 to switch off the 

humidifier.

Note

• 

If the water level in the tank is getting ver y 

low, the humidifier stops humidifying. The red 

 indicator light first star ts blinking and then 

remains on.

• 

The humidifier releases ver y fine invisible mist, 

so it is normal that you cannot see the mist.

Change the fan speed

Auto

The  auto  mode  uses  the  digital  sensor  to  con-

stantly monitor the air humidity. It turns your hu-

midifier on and off whenever needed to ensure 

the humidity level is constantly at the right level. 

The default humidity level of the auto mode 

is  set  at  50RH%,  but  you  can  change  it  to  the 

humidity  level  you  need  under  the  auto  mode. 

Next time when you switch on the humidifier, it 

will remember your last set humidity level, unless 

you have removed the plug from the wall socket. 

In  this  case  the  default  humidity  level  is  set  at 

50RH% again.

1 

Press the speed button 

 to select the 

auto mode (fig. 

g

).

»

The 

AUTO

 speed light goes on.