VITEK VT-1256 VT - Инструкция по эксплуатации - Страница 7

7

              ENGLISH         

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend 
cleaning the steam chamber, especially in the 
regions with “hard” water.
•  

Set the steam supply regulator

 (3) to the 

off position

.

•   Fill the water tank (11) till the MAX mark 

(13).

•   Put the iron on the base (8). 

•   Insert the power plug into the outlet

.

•  

Set the temperature regulator (10) to the 
MAX. temperature

, the (9) indicator will 

light up (Pic.3). 

•  When the sole temperature (12) reaches 

the desired temperature value, the (9) indi-
cator will go out, you can start cleaning of 
the iron chamber.

•  Unplug the iron, set the temperature regu-

lator (10) to the 

«

MIN

» position

.

•   Pull the plug out of the socket.  
•   Hold the iron above the sink horizontally, 

press and hold the SELF CLEAN button 
(pic.7).

•  Boiling water together with scale will be 

throwing out from the openings in the iron 
sole (12).

•   Slightly sway the iron back and forth, until 

water goes out of the water tank (11).

•   Place the iron on the base (8) and let it cool 

down completely.

•   When the sole (12) cools down completely, 

wipe it with a dry cloth.

•  

Before you take the iron for storing, make 
sure that there is no water in the water tank 
(11) and that the iron sole (12) is complete-
ly dry. 

CARE AND CLEANING

•   Before cleaning the iron, make sure that it 

is turned off and has cooled completely. 

•   W ipe the iron’s outer surface with a damp 

cloth and then wipe dry. 

•   Sediment on the iron sole can be removed 

with a cloth soaked in vinegar-water solu-
tion. 

•   After removing sediment, polish the sole 

with a dry cloth. 

•   Do not use abrasive substances to clean 

the sole and body of the iron. 

•  Avoid touching the iron sole with sharp 

metal objects. 

STORAGE

•   Turn the temperature regulator (10) anti-

clockwise till MIN position, set the steam 
release regulator (3) to the steam OFF po-
sition. 

•   Remove the power plug from the outlet. 
•   Let the unit cool down.

•   Open the water tank lid (2), turn over the 

iron and d

rain any remaining water from 

the water tank 

(11) (pic. 8).

•   Close the lid (2).

•   Store the iron vertically in a dry coo, place 

out of the reach of children

.

Delivery set

1.  Iron – 1 pc.
2.  Water bowl – 1pc.

TECHNICAL CHARACTERISTICS

Power requirements: 220V -240 V ~ 50 Hz
Power consumption: 2000 W

Specifications subject to change without prior 
notice.

Service life of  appliance -  3 years

GUARANTEE

Details regarding guarantee conditions can 
be obtained from the dealer from whom the 
appliance was purchased. The bill of sale or 
receipt must be produced when making any 
claim under the terms of this guarantee.

This product conforms to the EMC-
Requirements as laid down by the 
Council Directiv e 89/336/EEC 
and to the Law Voltage Regulation 
(73/23 EEC)

1256.indd   7

1256.indd   7

25.03.2010   11:37:20

25.03.2010   11:37:20