VITEK VT-1256 VT - Инструкция по эксплуатации - Страница 4

4

STEAM IRON

DESCRIPTION

1 – Water spray nozzle
2 – Water tank lid
3 – Steam supply regulator

4 - 

Spray button

5 - 

Additional steam release button

6 – Handle

7 – Power cord protection
8 – 

Iron base

9 – Heating element on/off indicator
10 –

Temperature regulator

11 - 

Water reservoir

12 - 

Iron sole

13 - 

Maximal water level indication

14. SELF CLEAN button
15 – 

Water bowl

SAFETY MEASURES

Before using the unit, please read the instruc-
tions carefully and pay attention to the illus-
trations. 
•   Before switching on the unit, 

make sure 

that your home electricity supply corre-
sponds to the voltage of current specified 
on the unit.

•  Power cord is equipped with a euro plug; 

insert it into the socket, with secure 
grounding.  

•  

In order to avoid risk of fire do not use 
adapters while connecting the appliance 
to the outlet.

•  In order to avoid overloading of the power 

network do not switch on several applianc-
es with high power consumption simulta-
neously.

•   Use the unit only for the intended purpos-

es.

•   Place the iron on a flat stable surface.

•   This unit is not intended for usage by chil-

dren or disabled persons unless they are 
given all the necessary instructions on 
safety measures and information about 
danger, which can be caused by improper 
usage of the unit. 

•   Always unplug the unit while filling the wa-

ter tank with water.

•   Do not fill the water tank with scented liq-

uids, vinegar, starch solution, descaling 

reagents, chemical agents etc.

•   While operating the unit, provide that the 

water tank lid is firmly closed 

•

   Use the unit only on the ironing board.

•  

Provide that the power cord is not hang-
ing over the edge of the ironing board and 
make sure that it does not touch heated 
surfaces

.

•   Never leave the operating unit unattend-

ed.

•   Always unplug the unit if you do not use it.
•   To unplug the unit always take it by the 

plug, do not pull by the power cord.

•   Avoid contact with hot surfaces or outgo-

ing steam of the iron in order to avoid get-
ting burns.

•  

In order to avoid electric shock do not im-
merse the unit into water or other liquids

.

•   Do not use the unit after its falling down, if 

there visible damages in the unit or in case 
of water leakage. 

•   Do not use the unit if the plug or the power 

cord is damaged or if there are other dam-
ages in the unit. 

•  

In order to avoid electric shock do not 
repair the unit yourself. If there are some 
damages in the unit apply to the author-
ized service center.

•   Before taking the unit away for keeping, 

pour out the remaining water and let the 
unit cool down.

•   Keep the unit out of the reach of children 

and disabled persons.

•  Do not allow children to use the unit as a 

toy. 

BEFORE USAGE

•   Unpack the unit and if there is a protective 

cartoon on the iron sole

 (12), remove the 

cartoon.

•  

Make sure that the electrical supply volt-
age corresponds to the iron’s operating 
voltage. 

Note:
The iron’s heating element is burning dur-
ing the first use; it is normal for a small 
amount of smoke to be released.

 ENGLISH

1256.indd   4

1256.indd   4

25.03.2010   11:37:20

25.03.2010   11:37:20