Philips GC9040/02 - Инструкция по эксплуатации - Страница 9

  6 

 To iron with steam, set the temperature dial to 

2

 or higher. 

  7 

 Put the plug in an earthed wall socket.

Set the on/off knob to ‘on’. 

The steam light flashes to indicate that the steam generator is heating 

up. After 2 minutes the appliance is ready for use. You hear two beeps, 

the steam light stops flashing and stays on. Press the steam trigger for 

steam.

Type GC9040 only: To remove stubborn creases, you can use the steam 

boost function. Set the temperature dial between 

3

 and MAX. 

Press the steam boost button. 

Never direct the steam at people.

  8 

 Press the steam button to select the desired steam setting.

;

 for moderate steam output and # for high steam output (set a 

temperature from 

3

 to MAX) 

l

 for low steam output (set a temperature from 

2

 to MAX). 

Note: If you do not use the iron for more than 10 minutes, the appliance 

switches off automatically for safety reasons. The automatic shut-off light 

flashes. To switch on the appliance again, press any button.

auto Calc Clean function

This appliance is equipped with an Auto Calc Clean function. Over 

time, scale par ticles build up inside the steam generator. The appliance 

automatically performs a Calc Clean process to clean itself from scale after 

using 6 to 8 tanks of water.

-

-

-

-

-

OFF

ON

OFF

ON

ON

ON

OFF

ON

OFF

ON

EnGlish

9