Philips GC9040/02 - Инструкция по эксплуатации - Страница 11

 Put the mains plug in an earthed wall socket.

 To start the Calc Clean process manually, keep the middle steam 

selection button pressed while switching on the appliance at the 

same time. Release the steam selection button only when the blue 

Auto Calc Clean light flashes.

 Follow steps 1- of the Auto Calc Clean process described above.

Note: The manual Calc Clean process can only be activated if the appliance is 

sufficiently cold. If the appliance is too hot for the manual Calc Clean process, 

the steam selection button flashes and the appliance continues to heat up for 

use.

storage

  1 

 Switch off the appliance (1) and unplug it ().

Press the cord rewind button to store the cord.

Empty the Calc Clean tank if it is filled.

 Wind the supply hose round the bottom of the steam generator.

Note: Make sure the supply hose sits properly in the storage groove and inside 

the bracket.

 Place the heat-resistant iron resting mat on the steam generator and 

put the iron on the mat.

Note: You do not have to wait for the appliance to cool down. You can store the 

appliance immediately after use.

-

-

1

2

OF

F

ON

1

2

OF

F

ON

EnGlish

11