Philips GC9040/02 - Инструкция по эксплуатации - Страница 12

 Slide the carry lock slide to the right to lock the iron onto the steam 

generator.

  5 

 With one hand, you can now easily carry the whole appliance by the 

handle of the iron.

troubleshooting 

This chapter summarises the most common problems you could 

encounter with the appliance. If you are unable to solve the problem with 

the information below, please contact the Philips Consumer Care Centre in 

your countr y. 

Problem

Possible cause and solution

The appliance does not 

become hot.

There is a connection problem. Check the mains cord, the plug and the wall 

socket.
The appliance has not been switched on. Set the on/off knob to ‘on’.
The set temperature is too low. Set a higher temperature.

Smoke comes out of 

my new ironing system 

when I switch it on.

Some par ts of the appliance have been lightly greased in the factor y and 

may initially give off some smoke when heated. This phenomenon is perfectly 

normal and ceases after a shor t while

The appliance does not 

produce any steam.

There is not enough water in the water tank. Fill the water tank.

The steam generator has not heated up sufficiently. Wait approx. 2 minutes.

The set ironing temperature is too low for steam ironing. Select a 

temperature of 

2

 or higher.

The water tank is not placed properly in the steam generator. Place the water 

tank properly in the steam generator (‘click’).

EnGlish

1