Philips GC7805/20 - Инструкция по эксплуатации - Страница 8

10

Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has 
accumulated inside the iron. This is normal.

For more information on how to carry out the Calc-Clean process, refer to the videos in this link: 
http://www.philips.com/descaling-iron.

Cleaning the soleplate

To properly maintain your appliance, clean it regularly.

1 

Clean the appliance with a moist cloth.

2 

To easily and effectively remove stains, let the soleplate heat up and move the iron over a moist 
cloth (Fig. 25).

Tip: Clean the soleplate regularly to ensure smooth gliding.

Storage

1 

Switch off the steam generator and unplug it.

2 

Pour the water out of the water tank into the sink (Fig. 26).

3 

Fold the water supply hose. Wind the water supply hose inside the water supply hose storage 
compartment and secure it inside the storage hook (Fig. 27).

4 

Fold the mains cord and fasten it with the Velcro strip (Fig. 28).

5 

Push the carry lock release button to lock the iron onto the iron platform (Fig. 29).

6 

You can carry the appliance with one hand by the handle of the iron when the iron is locked on the 
iron platform (Fig. 30).

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you 
are unable to solve the problem with the information below, visit

 www.philips.com/support 

for a list 

of frequently asked questions or contact the Consumer Care Center in your country.

Problem

Possible cause

Solution

The iron does not 
produce any steam.

There is not enough water in 
the water tank.

Fill the water tank beyond the MIN 
indication. Press and hold the steam trigger 
until steam comes out. It may take up to 30 
seconds until steam comes out.

You did not press the steam 
trigger.

Press and hold the steam trigger until 
steam comes out.

The steam function has 
been disabled until you 
have performed the Calc-
Clean process.

Perform the Calc-Clean process to restore 
the steam function. (see chapter ' Cleaning 
and maintenance')

At the start of your ironing 
session, the steam trigger 
has not been pressed long 
enough.

Press and hold the steam trigger until 
steam comes out. It may take up to 30 
seconds until steam comes out.

The light of the CALC-
CLEAN button flashes 
and the appliance beeps.

This is the Calc-Clean 
reminder.

Perform the Calc-Clean after the Calc-
Clean reminder is given (see chapter 
'Cleaning and maintenance').

English