Philips GC6310/03 - Инструкция по эксплуатации - Страница 8

  7 

 Remove the mains plug from the wall socket.

  8 

 Let the appliance cool down for approx.  minutes.

  9 

 Fill the steam tank as described in section ‘Filling the steam tank’ and let the appliance heat 

up again.

setting the temperature

  1 

 Put the iron on the iron stand.

 To set the required ironing temperature, turn the temperature dial to the appropriate 

position (Fig. 6).

Check the laundr y care label for the required ironing temperature:

Symbol on 

laundry care label

Type of fabric

Temperature 

setting

Steam setting 

(GC60 only)

B

Synthetic fabrics (e.g. acetate, 

acr ylic, viscose, polyamide, 

polyester) and silk

1

MIN (see ‘Ironing 

without steam’)

C

Wool

2

Low to medium

D

Cotton, linen

3

Medium to MAX

Z

Please note that 

Z

 on the label 

means that the ar ticle cannot be 

ironed.

If you do not know what kind or kinds of fabric an ar ticle is made of, determine the right ironing 

temperature by ironing a par t that is not visible when you wear or use the ar ticle.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. 

Star t ironing the ar ticles that require the lowest ironing temperature, such as those made of 

synthetic fibres.

 Put the mains plug in an earthed wall socket and set both the steam tank switch and the iron 

switch to ‘on’.  (Fig. 7)

The steam tank and iron power-on lights go on. The temperature light on the iron also goes 

on.

The steam tank and the soleplate start to heat up.

Note: The iron is hot enough when the temperature light goes out.
Note: If you have ironed at a high temperature and then set the temperature dial to a lower setting, wait 

until the temperature light goes on again before you continue ironing. This prevents damage to your 

fabrics.
Note: During ironing, the temperature light goes on from time to time. This indicates that the iron is 

heating up to the right temperature.

tips

If the fabric consists of various kinds of fibres, always select the temperature required by the 

most delicate fibre, i.e. the lowest temperature. For example: if an ar ticle consists of 60% 

polyester and 40% cotton, it must be ironed at the temperature indicated for polyester ( 

1

) and 

without steam. 

When you steam iron woollen fabrics, shiny patches may occur. To prevent this, use a dr y 

pressing cloth or turn the ar ticle inside out and iron the reverse side.

,

,

-

-

EnGlish

8