Philips GC6310/03 - Инструкция по эксплуатации - Страница 11

storage

Make sure the appliance has cooled down sufficiently before you put it away.

  1 

 Remove the mains plug from the wall socket and let the appliance cool down.

 Empty the steam tank.

 Regularly check if the mains cord and the supply hose are still undamaged and safe.

Environment

Do not throw away the appliance with the normal household waste at the end of its life, but 

hand it in at an official collection point for recycling. By doing this, you help to preserve the 

environment (Fig. 1).

guarantee & service 

If you need information or if you have a problem, please visit the Philips website at 

www.philips.com 

or contact the Philips Customer Care Centre in your countr y (you find its phone number in the 

worldwide guarantee leaflet). If there is no Customer Care Centre in your countr y, turn to your 

local Philips dealer or contact the Ser vice Depar tment of Philips Domestic Appliances and Personal 

Care BV.

troubleshooting

This chapter summarises the most common problems you could encounter with your iron. Please 

read the different sections for more details. If you are unable to solve the problem, please contact 

the Philips Customer Care Centre in your countr y. 

Problem

Cause

Solution

The appliance 

does not become 

hot.

There is a connection problem.

Check the mains cord, the plug 

and the wall socket.

The steam tank is not switched on.

Make sure the steam tank switch 

is set to ‘on’.

The selected temperature is too low.

Select a higher temperature.

The iron has not been switched on.

Make sure the iron switch is set 

to ‘on’.

Smoke comes 

out of my new 

iron when I 

switch it on.

Some par ts of the appliance have been 

lightly greased in the factor y and may 

initially give off some smoke when heated.

This phenomenon is perfectly 

normal and will cease after a 

shor t while.

The iron does 

not produce any 

steam.

The steam tank and/or the iron may not 

be switched on.

Set both the iron switch and the 

steam tank switch to ‘on’.

There is not enough water in the water 

tank.

Fill the water tank (see chapter 

‘Preparing for use’).

The steam tank has not heated up 

sufficiently.

Wait for 6 to 8 minutes for the 

steam tank to heat up.

,

EnGlish

11