Philips GC5034/20 - Инструкция по эксплуатации - Страница 7

Problem

Possible cause

Solution

You are ironing before the 
iron gets ready

Wait until the iron is ready (the light on the 
display panel stops flashing).

Dirty water 
and impurities 
come out of the 
soleplate during 
ironing. 

Hard water with impurities 
or chemicals has formed 
flakes inside the soleplate.

Perform Quick Calc Release (specific types only) 
or Calc-Clean (specific types only).
See chapter “Cleaning and maintenance”.

There is an amber 
light flashing on 
the handle of the 
iron.

The Calc-Clean reminder 
light is activated. This is 
to remind you to perform 
Calc-Clean. 

Perform Quick Calc Release (specific types only) 
or Calc-Clean (specific types only).
See chapter “Cleaning and maintenance”.

The iron leaves a 
shine or an imprint 
on the garment.

The surface to be ironed 
was uneven, for instance 
because you ironed over 
a seam or a fold in the 
garment.

The iron is safe to use on all ironable garments. 
The shine or imprint is not permanent and 
disappears when you wash the garment. Avoid 
ironing over seams or folds. You can also place a 
cotton cloth over the area to be ironed to avoid 
imprints.

The iron makes a 
lot of noise.

There is no water in the 
appliance.

Fill the water in the water tank.

11

English