Утюги Maxwell MW-3042 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
ENGLISH
•
Set the continuous steam supply knob (3)
to the «o» position – continuous steam sup-
ply is off.
•
Insert the power plug into the mains socket.
•
Make sure that there is enough water in the
water tank (10).
•
Turn the knob (9) to set the required ironing
temperature: «
•••
» or
«MAX»
, the indicator
(11) will light up.
•
When the iron soleplate (13) reaches the set
temperature, the indicator (11) will go out,
you can start ironing.
•
Turn the continuous steam supply knob (3) to
the position
– the steam supply is on and
the steam will start going out from the iron
soleplate (13) openings.
•
After you finish ironing, set the temperature
control knob (9) to the
«MIN»
position and turn
the continuous steam supply knob (3) to the
position «о» – continuous steam supply is off.
•
Pull the power plug out of the mains socket
and let the iron cool down completely.
AT TENTION!
If steam is not supplied constantly during the
operation, check whether the temperature con-
trol knob (9) and the steam supply knob (3) are
set properly and whether there is water in the
water tank (10).
BURST OF STEAM
The burst of steam function is useful for ironing
folds and can only be used at high ironing tem-
peratures (when the iron temperature control
knob (9) is set to the position «
•••
» or
«MAX»
(
the steam ironing sector is marked with the sym-
bol «
» on the temperature control knob (9)
).
•
When pressing the burst of steam button (4)
steam will go out of the iron soleplate more
intensively.
Note:
To avoid water leakage from steam open-
ings, press the burst of steam button (4) with an
interval no less than 4-5 sec.
VERTICAL STEAMING
Vertical steam function can be used only at high
ironing temperatures (that is, when the tempera-
ture control knob (9) is set to «
•••
» or
«MAX»
).
Hold the iron vertically at the distance of
10-30 cm from the clothes and press the burst
of steam button (4) with a 4–5 second interval,
steam will be released from the iron soleplate
(13) intensively.
Important information:
Vertical steaming is not
recommended for synthetic fabrics.
•
To avoid fabric melting, do not touch it with
the iron soleplate while steaming.
•
Never steam clothes on a person as the
steam temperature is very high, use a clothes
hanger or a coat rack.
•
After you finish ironing, switch the unit off,
wait until it cools down completely, then open
the water inlet lid (2), turn over the iron and
pour out the remaining water.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend
cleaning the steam chamber regularly.
•
Set the continuous steam supply knob (3)
to the position «о» – continuous steam sup-
ply is off.
•
Fill the water tank (10) up to the maximal mark
«MAX»
.
•
Place the iron on its base (8).
•
Insert the power plug into the mains socket.
•
Turn the temperature control knob (9) to
set the iron soleplate maximal temperature
«MAX»
, the indicator (11) will light up.
•
When the iron soleplate (13) reaches the
desired temperature value, the indicator (11)
will go out, you can start cleaning the steam
chamber.
•
Switch the iron off by setting the temperature
control knob (11) to the
«MIN»
(OFF) posi-
tion. Remove the power plug from the mains
socket.
•
Place the iron horizontally above the sink, set
the continuous steam supply knob (3) to the
position «SELF CLEAN» – self-clean.
•
Boiling water and steam with scale will be
released from the iron soleplate (13) open-
ings.
•
Slightly sway the iron back and forth, until all
the water leaves the water tank (10).
•
Set the continuous steam supply knob (3)
to the position «о» – continuous steam sup-
ply is off.
•
Place the iron on its base (8) and let it cool
down completely.
•
When the iron soleplate (13) cools down com-
pletely, wipe it with a dry cloth.
•
Before you take the iron away for storage,
make sure that there is no water in the water
tank (10) and that the iron soleplate (13) is
dry.
IM MW-3042.indd 14
13.05.2016 16:01:34
