Утюги Maxwell MW-3042 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
ENGLISH
IRON MW-3042 VT
The iron is intended for ironing clothes and bed-
ding and for vertical steaming of fabrics.
DESCRIPTION
1.
Water spray
2.
Water inlet lid
3.
Continuous steam supply knob / self-clean
4.
Burst of steam button
5.
Water spray button
6.
Handle
7.
Power cord protection
8.
Base
9.
Temperature control knob
10.
Water tank
11.
Heating element ON/OFF indicator
12.
“MAX” water level mark
13.
Soleplate
AT TENTION!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal
operation current not exceeding 30 mA, to install
RCD, contact a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruc-
tion manual carefully and keep it for future refer-
ence.
Use the unit for its intended purpose only, as
specified in this manual. Mishandling of the unit
may lead to its breakage and cause harm to the
user or his/her damage to property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
iron operating voltage.
•
The power cord is equipped with a «euro-
plug»; plug it into the socket with a reliable
grounding contact.
•
To avoid fire, do not use adapters for plug-
ging the unit in.
•
To avoid mains overloading, do not switch on
several electrical appliances with high power
consumption at a time.
•
Do not use the iron outdoors and in places
with high humidity.
•
Place the iron on a flat stable surface or use
a stable ironing board.
AT TENTION!
The surfaces of the iron warm up
during operation. Avoid contact of open skin
areas with the iron hot surfaces or outgoing
steam to avoid burns.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals, etc.
•
Do not switch the unit on in places where
aerosols are sprayed or highly flammable liq-
uids are used.
•
Make sure that the power cord is not on the
ironing board and it doesn’t touch hot sur-
faces and sharp edges.
•
Never leave the unit connected to the mains
unattended. During breaks in operation and
when the iron is cooling down, put the iron on
the base (in a vertical position).
•
Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off.
•
Always unplug the iron if you are not using it.
•
Always take the power plug out of the mains
socket before filling the water tank with water.
•
The water inlet lid should be closed during
ironing.
•
To unplug the iron always hold the power
plug, never pull the power cord.
•
To avoid electric shock, do not immerse the
iron, the power cord and the plug into water
or any other liquids.
•
Before taking the iron away, let it cool down
completely and pour out the remaining water.
•
Pour out water from the water tank only after
unplugging the iron.
•
Clean the unit regularly.
•
Do not touch the unit body and the power
plug with wet hands.
•
Do not allow children to touch the unit body
and the power cord during operation.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave
polyethylene bags, used as packaging, unat-
tended.
Attention!
Do not allow children to play with
polyethylene bags or packaging film.
Danger
of suffocation!
•
Do not use the unit if the power cord or the
plug is damaged, if the unit works improp-
erly or after it was dropped or in case of
leakage.
IM MW-3042.indd 11
13.05.2016 16:01:34
