Ryobi RLT6130 5133003641 - Инструкция по эксплуатации - Страница 4

2

| English

■

Hearing protection may restrict the operator’s ability 
to hear warning sounds. Pay particular attention to 
potential hazards around and inside the working area.

■

Wear heavy, long trousers, boots, and gloves. Do not 
wear loose fitting clothing, short trousers, jewellery of 
any kind, or use with bare feet.

■

Secure long hair so it is above shoulder level to prevent 
entanglement in moving parts.

■

Before use and after any impact, check that there are 
no damaged parts. A defective switch or any part that 
is damaged or worn should be properly repaired or 
replaced by an authorised service facility.

■

Make sure the cutting attachment is properly installed 
and securely fastened.

■

Never operate the product unless all guards, deflectors 
and handles are properly and securely attached.

■

Consider the environment in which you are working. 
Keep the working area free from wires, sticks, stones 
and debris, which if struck by the cutter, can become 
thrown objects.

ELECTRIC LAWN TRIMMER / EDGE TRIMMER 
SAFETY WARNINGS 

■

Never allow children or people unfamiliar with these 
instructions to use the product. Local regulations may 
restrict the age of the operator.

■

Use the product in daylight or with good artificial light.

■

Avoid using on wet grass. 

■

Do not walk backwards when using the product.

■

Keep firm footing and balance. Do not overreach. 
Overreaching can result in loss of balance. Always be 
sure of your footing on slopes. Walk, never run.

■

Keep bystanders, children and pets 15 m away from 
the area of operation. Stop the product if anyone enters 
the area.

■

Keep the cutting attachment below waist level.

■

Never operate the product with damaged guards or 
without guards in place.

■

Never fit a metal replacement line.

■

Keep hands and feet away from the cutting means at all 
times, especially when switching on the motor.

■

Beware, the cutting elements continue to rotate after 
the motor is switched off.

■

Beware of objects thrown by the cutting means. Clear 
debris like small stones, gravel and other foreign 
objects from the work area before starting operation. 
Wires or string may become entangled with the cutting 
means.

■

Turn off the product and disconnect from the power 
supply. Make sure all moving parts have come to a 
complete stop:

●

before servicing

●

before clearing a blockage

●

before checking, cleaning, and working on the 
product

●

before changing accessories

●

after striking a foreign object

●

whenever leaving the product unattended

●

whenever performing maintenance

●

whenever the product starts to vibrate abnormally

■

The small blade fitted to the lawn guard is designed to 
trim the new extended line to the correct length for safe 
and optimum performance. It is very sharp; do not touch 
it, particularly when cleaning the product.

■

Always ensure that ventilation openings are kept clear 
of debris.

■

Make sure the cutting head attachment is  properly 
installed and securely fastened.

■

Make sure all guards, deflectors, and handles are 
properly and securely attached.

■

Do not modify the product in any way. This may 
increase the risk of injury to yourself or others.

■

Use only the manufacturer’s replacement cutting line. 
Do not use any other cutting attachment. 

■

Immediately switch off and disconnect from the mains 
in the event of accident or breakdown. Don’t operate 
the product again until it has been fully checked by an 
authorised service centre.

■

Ensure that the line cut-off blade in guard is properly 
positioned and secured before each use.

■

If the supply cord is damaged, it must be replaced 
by a special cord or assembly available from the 
manufacturer or its service agent.

■

Before every use, examine the supply cord for damage. 
If there are signs of damage, it must be replaced by 
a qualified person at an authorised service centre to 
avoid hazard.

TRANSPORTATION AND STORAGE

■

Stop the product and allow it to cool down before 
storing or transporting. Always disconnect from the 
power supply and wind the cable to prevent damage.

■

Clean all foreign materials from the product. Store it in 
a cool, dry and well-ventilated place that is inaccessible 
to children. Keep away from corrosive agents, such 
as garden chemicals and de-icing salts. Do not store 
outdoors.

■

For transportation in vehicles, secure the product 
against movement or falling to prevent injury to persons 
or damage to the product. 

MAINTENANCE

 WARNING

Use only original manufacturer’s replacement parts, 
accessories, and attachments. Failure to do so can 
cause possible injury, contribute to poor performance, 
and may void your warranty.

 WARNING

Servicing requires extreme care and knowledge 
and should be performed only by a qualified service 
technician. For service, bring the product to the nearest 
authorised service centre for repair. When servicing, use 
only original replacement parts.