Ryobi RLT3123 5133002361 - Инструкция по эксплуатации - Страница 5

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

3

starts to vibrate abnormally

●

performing maintenance

■

The small blade fitted to the lawn guard 

is designed to trim the new extended line 

to the correct length for safe and optimum 

performance. It is very sharp, do not touch 

it particularly when cleaning the product.

■

Always ensure that ventilation openings 

are kept clear of debris.

■

Make sure the cutting head attachment is 

properly installed and securely fastened.

■

Make sure all guards, deflectors and 

handles are properly and securely 

attached.

■

Do not modify the product in any way, this 

may increase the risk of injury to yourself 

or others.

■

Use only the manufacturer’s replacement 

cutting line. Do not use any other cutting 

attachment.

■

Immediately switch off and disconnect from 

the mains once in the event of accident 

or breakdown. Don’t operate the product 

again until it’s fully checked by authorised 

service center.

TRANSPORTATION AND STORAGE

■

Stop the product and allow it to cool before 

storing or transporting.

■

Clean all foreign material from the product. 

Store it in a cool dry and well-ventilated 

place that is inaccessible to children. 

Keep away from corrosive agents such as 

garden chemicals and de-icing salts. Do 

not store outdoors.

■

For storage, always disconnect from power 

supply and wind cable.

■

For transportation, secure the product 

against movement or falling to prevent 

injury to persons or damage to the product.

MAINTENANCE

 WARNING

Use only original manufacturer’s 

replacement parts, accessories and 

attachments. Failure to do so can cause 

possible injury, poor performance and may 

void your warranty.

 WARNING

Servicing requires extreme care and 

knowledge and should be performed 

only be a quali

fi

 ed service technician. For 

service we suggest you return the product 

to your nearest authorized service center for 

repair. When servicing, use only identical 

replacement parts.

■

Switch off and disconnect from the mains 

before: conducting any maintenance or 

cleaning work.

■

You may make adjustments and repairs 

described here. For other repairs, contact 

the authorized service agent.

■

For replacement line use only nylon 

filament line of the diameter described in 

the specification table of this manual

■

After extending new cutter line, always 

return the product to its normal operating 

position before starting.

■

After each use, clean the product with a 

soft dry cloth. Any part that is damaged 

should be properly repaired or replaced by 

an authorized service centre.

■

Check all nuts, bolts and screws at frequent 

intervals for proper tightness to ensure the 

product is in safe working condition.

RESIDUAL RISKS

Even when the product is used as prescribed, 

it is still impossible to completely eliminate 

certain residual risk factors. The following 

hazards may arise in use and the operator 

should pay special attention to avoid the 

following: 

■

Injury caused by vibration. Hold the product 

by designated handles and restrict working 

time and exposure.

■

Exposure to noise can cause hearing injury. 

Wear ear protection and limit exposure.

■

Eye injury due to flying debris. Wear eye 

protection at all times.

RISK REDUCTION

It has been reported that vibrations from 

hand-held products may contribute to a 

condition called Raynaud’s Syndrome in 

certain individuals. Symptoms may include 

tingling, numbness and blanching of the 

fi

 ngers, usually apparent upon exposure to