Ryobi RLT1825M13 5133002823 - Инструкция по эксплуатации - Страница 4

2

| English

sure of proper footing on slopes.

■

Do not walk backwards when using the product.

■

Walk, never run.

■

Keep the head attachment below waist level.

■

Never use the product with damaged guards or without 
guards in place. 

■

Do not fit a metal replacement line.

■

Keep hands and feet away from the cutting means at all 
times especially when switching on the motor.

■

Beware, the cutting elements continue to rotate after 
the motor is switched off.

■

Beware of objects thrown by the cutting means. Clear 
debris like small stones, gravel, and other foreign 
objects from the work area before starting operation. 
Wires or string may become entangled with the cutting 
means.

■

Switch off and remove the battery pack before:

●

servicing

●

leaving the product unattended

●

cleaning your product

●

changing accessories

●

checking for any damage after hitting an object

●

checking for any damage if the product starts to 
vibrate abnormally

●

performing maintenance

■

Wear full eye and hearing protection while using the 
product. If working in an area where there is a risk of 
falling objects, head protection must be worn.

■

Hearing protection may restrict the operator’s ability 
to hear warning sounds. Pay particular attention to 
potential hazards around and inside the working area.

■

Wear heavy long trousers, boots, and gloves. Do not 
wear loose fitting clothing, short trousers, jewellery of 
any kind, or use with bare feet.

■

Secure long hair so it is above shoulder level to prevent 
entanglement in moving parts.

■

The small blade fitted to the lawn guard is designed to 
trim the new extended line to the correct length for safe 
and optimum performance. It is very sharp, do not touch 
it particularly when cleaning the product. 

■

Always ensure that ventilation openings are kept clear 
of debris.

■

Before use and after any impact, check that there are 
no damaged parts. A defective switch or any part that is 
damaged should be properly repaired or replaced by an 
authorised service centre.

■

Make sure the cutting head attachment is properly 
installed and securely fastened.

■

Make sure all guards, deflectors, and handles are 
properly and securely attached.

■

Do not modify the product in any way, this may increase 
the risk of injury to yourself or others.

■

Use only the manufacturer’s replacement cutting line. 
Do not use any other cutting attachment. 

■

Immediately switch off and remove the battery pack 
in the event of accident or breakdown. Do not operate 
the product again until it has been fully checked by an 
authorised service centre.

 WARNING

Ensure that the line cut-off blade in guard is properly 
positioned and secured before each use.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of 

fi

 re, personal injury, and product 

damage due to a short circuit, never immerse your 
tool, battery pack or charger in 

fl

 uid or allow a 

fl

 uid  to 

fl

 ow inside them. Corrosive or conductive 

fl

 uids,  such 

as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

TRANSPORTATION AND STORAGE

■

Stop the product, remove the battery pack, and allow it 
to cool down before storing or transporting.

■

Clean all foreign material from the product. 

■

Do not store or transport the product with batteries 
fitted, remove and secure separately. Store the 
product in a cool, dry, and well-ventilated place that 
is inaccessible to children. Keep away from corrosive 
agents, such as garden chemicals and de-icing salts. 
Do not store outdoors.

■

For transportation in vehicles, secure the product 
against movement or falling to prevent injury to persons 
or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations. Follow all special requirements 
on packaging and labelling when transporting batteries by 
a third party.
Ensure that no batteries can come in contact with other 
batteries or conductive materials while in transport by 
protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries that are 
cracked or leaking. Check with the forwarding company for 
further advice.

MAINTENANCE

 WARNING

Use only original manufacturer’s replacement parts, 
accessories, and attachments. Failure to do so can 
cause possible injury, contribute to poor performance, 
and may void your warranty.

 WARNING

Servicing requires extreme care and knowledge 
and should be performed only by a quali

fi

 ed  service 

technician. For service, we suggest you bring the 
product to your nearest authorized service center for 
repair. When servicing, use only identical replacement 
parts.