Einhell X-Change GE-CC 18 Li Solo - Инструкция по эксплуатации - Страница 20

GB

- 20 -

Always use both hands to operate the equipment. 

Guide the equipment along the joints at a walking 

pace. For uniform results carry out your work at 

a constant speed. If necessary, guide the equip-

ment along the same joint several times.

7.  Cleaning, maintenance and 

ordering of spare parts

Danger!

Before putting away or cleaning, switch o

ff

  the pa-

ving scraper and remove the battery pack.

7.1 Cleaning

• 

 Keep all safety devices, air vents and the 

motor housing free of dirt and dust as far as 

possible. Wipe the equipment with a clean 

cloth or blow it with compressed air at low 

pressure.

• 

 We recommend that you clean the device  

immediately each time you have finished 

using it.

• 

 Clean the equipment regularly with a moist 

cloth and some soft soap. Do not use 

cleaning agents  or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The 

ingress of water into an electric tool increases 

the risk of an electric shock.

• 

Use a brush to remove deposits from the 

safety guard.

7.2 Maintenance

There are no parts inside the equipment which  

require additional maintenance.

7.3 Ordering replacement parts:

Please quote the following data when ordering 

replacement parts:

• 

 Type of machine

• 

 Article number of the machine

• 

 Identification number of the machine

• 

 Replacement part number of the part required

For our latest prices and information please go to 

www.isc-gmbh.info

Steel replacement brush: Art. No.: 34.241.00

Nylon replacement brush Art. No.: 34.241.10

8.  Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Never place defective equipment in 

your household refuse. The equipment should 

be taken to a suitable collection center for proper 

disposal. If you do not know the whereabouts of 

such a collection point, you should ask in your 

local council o

ffi

  ces. 

9. Faults

The equipment does not work:

Check that the battery is charged and whether 

the charging unit is working. If the equipment will 

not work in spite of the voltage supply being OK, 

please send it to the customer service address 

below.

Anl_GE_CC_18_Li_SPK7.indb   20

Anl_GE_CC_18_Li_SPK7.indb   20

25.08.2016   14:59:45

25.08.2016   14:59:45