Einhell X-Change GE-CC 18 Li Solo - Инструкция по эксплуатации - Страница 17

Триммеры Einhell X-Change GE-CC 18 Li Solo - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 114
Загружаем инструкцию
background image

GB

- 17 -

Danger!

 When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be 

found in the enclosed booklet.

Danger!

Read all safety regulations and instructions.

Any errors made in following the safety regula-

tions and instructions may result in an electric 

shock, 

fi

 re and/or serious injury.

Keep all safety regulations and instructions 

in a safe place for future use.

Explanation of the warning signs on the 

equipment (see Fig. 12)

1. Warning!

2.  Wear eye protection!

3.  Protect from moisture!

4.  Read the instruction manual before starting!

5.  Keep other people out of the danger area!

6.  Beware of catapulted objects.

7.  Rotating parts. Keep your hands and feet 

away from the brush.

2.  Layout and items supplied

2.1 Layout (Fig. 1/2)

1. Safety 

lock-o

 

2. On/O

  switch

3.  Adjustment lock for turning the handle

4. Additional 

handle

5. Height 

adjustment

6. Guard 

hood

7. Guide 

wheel

8. Nylon 

brush

9. Wire 

brush

10. Pin

11. Open-ended wrench

12. Nut

13. Battery pack

14. Charger

15.  Screws for the guard hood

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

• 

 Open the packaging and take out the equip-

ment with care.

• 

 Remove the packaging material and any 

packaging and/or transportation braces (if 

available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or su

 ocating!

• 

Paving scraper

• 

Battery (in the case of Art. No.: 34.240.50 it is 

not included in delivery)

• 

Charger (in the case of Art. No.: 34.240.50 it 

is not included in delivery)

• 

Original operating instructions

• 

 Safety  instructions 

3. Proper use

The equipment is designed to remove weeds 

from between paving stones and slabs. It is not 

intended for use on sensitive surfaces like tiles.

Equipment designed for use in private and hobby 

gardens is regarded as unsuitable for use in pub-

lic facilities, parks and sports centers, along road-

ways, or in agriculture and forestry. The operating 

instructions as supplied by the manufacturer must 

be obeyed to ensure that the equipment is used 

properly.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

Anl_GE_CC_18_Li_SPK7.indb   17

Anl_GE_CC_18_Li_SPK7.indb   17

25.08.2016   14:59:44

25.08.2016   14:59:44

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Einhell X-Change GE-CC 18 Li Solo?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"