Decker ST4525 - Инструкция по эксплуатации - Страница 10

10

ENGLISH

(Original instructions)

If the automatic line feed still does not work or the 

spool is jammed, try the following suggestions:

u

  Carefully clean the spool cover and housing.

u

  Remove the spool and check if the lever can move freely.

u

  Remove the spool and unwind the cutting line, then wind it 

on neatly again as described above. Replace the spool as 

instructed.

Maintenance

Your Black & Decker corded/cordless appliance/tool has been 

designed to operate over a long period of time with a minimum 

of maintenance. Continuous satisfactory operation depends 

upon proper tool/appliance care and regular cleaning.

Your charger does not require any maintenance apart from 

regular cleaning.
Warning! Before performing any maintenance on corded/

cordless power tools:

u

  Switch off and unplug the appliance/tool.

u

  Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u

  Or run the battery down completely if it is integral and then 

switch off.

u

  Unplug the charger before cleaning it. Your charger does 

not require any maintenance apart from regular cleaning.

u

  Regularly clean the ventilation slots in your tool/appliance 

and charger using a soft brush or dry cloth.

u

  Regularly clean the motor housing using a damp cloth. Do 

not use any abrasive or solvent-based cleaner.

u

  Regularly clean the cutting line and spool using a soft 

brush or dry cloth.

u

  Regularly use a blunt scraper to remove grass and dirt 

from the underneath of the guard.

Protecting the environment

Z

Separate collection. This product must not be 

disposed of with normal household waste.

Should you find one day that your Black & Decker product 

needs replacement, or if it is of no further use to you, do not 

dispose of it with household waste. Make this product avail-

able for separate collection.

z

Separate collection of used products and packag-

ing allows materials to be recycled and used again.  

Re-use of recycled materials helps prevent 

environmental pollution and reduces the demand 

for raw materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or 

by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and 

recycling of Black & Decker products once they have reached 

the end of their working life. To take advantage of this service 

please return your product to any authorised repair agent who 

will collect them on our behalf.

You can check the location of your nearest authorised repair 

agent by contacting your local Black & Decker office at 

the address indicated in this manual. Alternatively, a list of 

authorised Black & Decker repair agents and full details of our 

after-sales service and contacts are available on the Internet 

at: www.2helpU.com

Technical data

ST4525
Type 1

ST5530
Type 1

Input Voltage

V

AC

230

230

Power Input

W

450

550

No-Load Speed

min

-1

7300

7500

Weight

kg

2.5

2.5

Hand/arm weighted vibration value according to EN 786:
= 3.8 m/s

2

, uncertainty (K) = 1.5 m/s

2

.

L

PA

 (sound preasure) 80 dB(A)

uncertainty (K) = 1 dB(A)