Microlife BP A100 - Инструкция по эксплуатации - Страница 7

Тонометры Microlife BP A100 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 105
Загружаем инструкцию
background image

5

BP A100

EN

8. Using a Mains Adapter

You can operate this instrument using the Microlife mains adapter 
(DC 6V, 600mA). 

Only use the Microlife mains adapter available as an orig-
inal accessory appropriate for your supply voltage, e.g. the 
«Microlife 230V adapter».

Ensure that neither the mains adapter nor the cable are 
damaged.

1. Plug the adapter cable into the mains adapter socket 

5

 in the 

blood pressure monitor.

2. Plug the adapter plug into the wall socket.
When the mains adapter is connected, no battery current is consumed.

9. Error Messages

If an error occurs during the measurement, the measurement is 
interrupted and an error message, e.g. «

ERR 3

», is displayed.

* Please consult your doctor, if this or any other problem occurs 
repeatedly.

If you think the results are unusual, please read through the 
information in «Section 1.» carefully.

10. Safety, Care, Accuracy Test and Disposal

Safety and protection

This instrument may only be used for the purposes described in 
this booklet. The manufacturer cannot be held liable for damage 
caused by incorrect application.

This instrument comprises sensitive components and must be 
treated with caution. Observe the storage and operating condi-
tions described in the «Technical Specifications» section!

Protect it from:
- water and moisture
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold

The cuffs are sensitive and must be handled with care.

Only pump up the cuff once fitted.

Do not use the instrument close to strong electromagnetic fields 
such as mobile telephones or radio installations.

Do not use the instrument if you think it is damaged or notice 
anything unusual.

Never open the instrument.

If the instrument is not going to be used for a prolonged period 
the batteries should be removed.

Read the additional safety instructions in the individual sections 
of this booklet.

Ensure that children do not use the instrument unsuper-
vised; some parts are small enough to be swallowed.

Instrument care

Clean the instrument only with a soft, dry cloth.

Cleaning the cuff

You can machine wash the 

cuff cover

 at 30°C (do not iron!).

WARNING: 

Under no circumstances, however, may you 

wash the inner bladder! Always remove the sensitive 
bladder from the sleeve before washing and replace it care-
fully again afterwards.

Error

Description Potential cause and remedy

«

ERR 1

» Signal too 

weak

The pulse signals on the cuff are too weak. 
Re-position the cuff and repeat the 
measurement.*

«

ERR 2

» Error  signal During the measurement, error signals were 

detected by the cuff, caused for instance by 
movement or muscle tension. Repeat the 
measurement, keeping your arm still.

«

ERR 3

» No pressure 

in the cuff

An adequate pressure cannot be generated 
in the cuff. A leak may have occurred. 
Check that the cuff is correctly connected 
and is not too loose. Replace the batteries if 
necessary. Repeat the measurement.

«

ERR 5

» Abnormal 

result

The measuring signals are inaccurate and 
no result can therefore be displayed. Read 
through the checklist for performing reliable 
measurements and then repeat the 
measurement.*

«

HI

»

Pulse or 
cuff pres-
sure too 
high

The pressure in the cuff is too high (over 
300 mmHg) OR the pulse is too high (over 
200 beats per minute). Relax for 5 minutes 
and repeat the measurement.*

«

LO

»

Pulse too 
low

The pulse is too low (less than 40 beats per 
minute). Repeat the measurement.*

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Microlife BP A100?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"