B.Well WM-61 - Инструкция по эксплуатации - Страница 17

Instruction manual

WA-22H

17

En

Other possible malfunctions and their elimination

If problems occur when using the device, the following points should be checked and if necessary, the corresponding measures are to be taken:

Malfunction Remedy 

The display remains empty when the instrument is switched on although 
the batteries are in place.

1. Check batteries for correct polarity and if necessary insert correctly
2. If the display is unusual, re-insert batteries or exchange them.

The device frequently fails to measure the blood pressure values, or the 
values measured are too low (too high).

1. Check the positioning of the cuff . 
2. Measure the blood-pressure again in peace and quiet under observance 
of the details made under point 5.

Every measurement results in diff erent values, although the device func-
tions normally and normal values are displayed.

Please pay attention to the following information as well as the points 
listed under «Common sources of error» and repeat the measurement.

The blood pressure values measured diff er from those measured by the 
doctor

Record the daily development of the values and consult your doctor about 
them

        Further Information

The level of blood-pressure is subject to fl uctuations even with healthy people. Important thereby is, that comparable measurements always require the 
same conditions (Quiet conditions)!
You must consult your specialist dealer or chemist if there are technical problems with the blood pressure instrument.

Never attempt to repair the instrument yourself! Any unauthorized opening of the instrument invalidates all guarantee claims!

IM_ WA22H_both_RU_ EN_KZ_3614.indd   17

IM_ WA22H_both_RU_ EN_KZ_3614.indd   17

03.09.2014   16:24:01

03.09.2014   16:24:01

Process Cyan

Process CyanProcess Magenta

Process MagentaProcess Yellow

Process YellowProcess Black

Process Black