B.Well WM-61 - Инструкция по эксплуатации - Страница 11

Instruction manual

WA-22H

11

En

4. Putting the blood-pressure monitor into operation
4.1. Inserting the batteries 

Follow these steps to insert four AA batteries in the device.

1. Open the battery compartment cover in the direction shown.
2. Insert the four AA batteries with the correct polarity
as indicated.
3. Re-place the battery compartment cover.

   Attention!

• If the battery warning             appears in the display, the batteries are fl at and must be replaced by new ones.
• After the battery warning            appears, the device is blocked until the batteries have been replaced.
• Please use «AA» Long-Life or Alkaline 1.5V Batteries. 
• If the blood-pressure monitor is left unused for long periods, please remove the batteries from the device.

Functional check: 

Press and hold the            («O/I+Memory button») to test all the display elements. When functioning correctly all segments appear.

4.2. Using a mains adapter

1) Plug the mains adaptor into a 100-240 V, 
50/60Hz power socket. 
2) Plug the DIN plug into the socket at the 
right side of the instrument. 

No power is taken from the batteries while 
the mains adaptor is connected to the instrument.

IM_ WA22H_both_RU_ EN_KZ_3614.indd   11

IM_ WA22H_both_RU_ EN_KZ_3614.indd   11

03.09.2014   16:24:00

03.09.2014   16:24:00

Process Cyan

Process CyanProcess Magenta

Process MagentaProcess Yellow

Process YellowProcess Black

Process Black