TP-LINK EAP615 WALL AX1800 - Инструкция по эксплуатации - Страница 33

29

•

WPA-Personal

WPA-Personal is based on a pre-shared key. It is characterized by high safety and simple 
settings, so it is mostly used by common households and small businesses.

The following table introduces how to configure each item:

Version

Select  the  version  of  WPA-Personal  according  to  your  needs.  If  you  select 

WPA/WPA2-PSK,  the  EAP  automatically  decides  whether  to  use  WPA-PSK 

or WPA2-PSK during the authentication process.

Encryption

Select the Encryption type. Note that some encryption type is only available 

under certain circumstances.

Auto:

  The  default  setting  is  Auto  and  the  EAP  will  select  TKIP  or  AES 

automatically based on the client device’s request.

TKIP:

  Temporal  Key  Integrity  Protocol.  TKIP  is  not  supported  in  802.11n 

mode,  802.11ac  mode  or  802.11n/ac  mixed  mode.  If  TKIP  is  applied  in 

802.11n, 802.11 ac or 802.11n/ac mixed mode, the clients may not be able 

to access the wireless network. If TKIP is applied in 11b/g/n mode (2.4GHz) 

or 11a/n mode(5GHz), the device may work at a low transmission rate.

AES:

 Advanced Encryption Standard. It is securer than TKIP.

Wireless

Password

Configure the wireless password with ASCII characters.

•

For ASCII, the length should be between 8 and 63 and the valid characters 

contain numbers, letters (case-sensitive) and common punctuations.

Group Key 

Update Period

Specify an update period of the encryption key. The update period instructs 

how  often  the  EAP  should  change  the  encryption  key.  0  means  that  the 

encryption key does not change at anytime.