Thomson T32E53U - Инструкция по эксплуатации - Страница 9

You are recommended to use the 

Full 

screen mode. 

Do not use the display mode with black bands on both 
sides of the picture (such as 

Standard

) for long time, 

otherwise the TV screen may be damaged permanently.

Notes:

When 

Zoom

 is selected, you can press the left / right 

direction button to zoom out / in the picture after exiting 
from menu.

80

Standard

Full

50
50
50
50

0

Normal

Off
Off

BackLight

Picture Mode
Scale
Brightness
Contrast
Saturation
Sharpness

Color Temp
Natural Light
Dynamic Contrast

Tint

Picture

9

Swapping Two Channels

1. select 

the 

Current Channel

 option and press the left or right

 the 

Target Channel

 option and press the left or right 

 the 

Swap

 option and press the left, right 

Press the up or down direction button to 

    direction button to select a channel number.

2. Press the up or down direction button to select

direction button to select the channel number to be 

    swapped.

3. Press the up or down direction button to select

direction or 

OK

    button to swap.

Skipping a Channel

Advanced Functions

Chapter 3

General Operation

Adjusting the Picture

The menus for adjusting the picture are used to obtain the 
best picture setting according to your preference, the type 
of programme you are watching and the ambient lighting. 

Display the menu by pressing the 

Menu

 button. Press the 

left or right direction button to select the 

Picture

 icon and 

press the

 or down direction or 

OK

 button to enter

the 

Picture

 menu. The 

Picture

 options are as below: 

Back Light

: 

Picture Mode: 

use the

direction or 

OK

through the picture preset 

settings: 

Standard

, 

Bright

, 

Soft

 or 

,

 up

this option can be used to adjust the 

brightness of the backlight, depending on room lighting. 
Use the left or right direction button to adjust.

 right

 button 

to 

display the selectable options, then press the up or down 
direction button to scroll 

Personal

 and press 

the right direction or 

OK

 button to confirm. 

Note:

 When selecting 

Standard

, 

Bright

, 

Soft

, the 

Back Light

 will restore to the defaulted setting in 

factory. You are recommended to use the 

Bright

 mode 

for vivid palette.

If a channel was stored twice or its reception is poor, you 
can simply skip it. The skipped channels can not be 
selected by pressing the 

CH +/- 

buttons.

1. select 

the 

Current Channel 

option and  press the left or right

 the 

Skip

 option and press the left or right

Press the up or down direction button to 

direction button to select the channel number to be 

    skipped.

2. Press the up or down direction button to select

 direction button 

    to select 

Yes

.

3.  

Press 

Menu

 to return or 

Exit

 to close the menu.

Note:

 Some options may be not available for certain 

signal sources.

Scale:

 use the

direction or 

OK

through the picture size:

 Standard

, 

Full

, 

, 

Wide Screen

, 

Zoom

, 

Expand 

button to display 

the selectable options, then press the up or down direction 
button to scroll 

Subtitle

 (

Note

: some options may be not selectable for 

certain signal sources.)

 And press the right direction or 

OK

button to confirm. 

 right

Original

 and 

Natural

.

Press 

Menu

 to return or 

Exit

 to close the menu.

Note: 

Tint is available to be adjusted only when the 

system of the video signal is NTSC.

Brightness: 

adjusts the brightness of the picture.

Contrast: 

adjusts the difference between the light and 

dark areas of the picture.

Saturation: 

adjusts the richness of color.

Sharpness:

adjusts the crispness of the edges in the 

picture.

Tint

adjusts the balance between the red and green 

levels.

: 

Color Temp (Color Temperature):

 adjusts the color 

temperature of the picture.  Use the

direction or 

OK

through 

.

 right

button to display the selectable options, then press the up 
or down direction button to scroll 

the color settings: 

Cool

 for a more blue palette of picture colors; 

Normal

; and 

Warm

 for a more red palette of picture colors

Natural Light 

:

 turns on this option to adjust the 

brightness of the backlight according to the content of the 
inputted signal automatically, so as to optimize the picture 
quality and decrease the power consumption.

Dynamic Contrast

:

 turns on this option to adjust the

contrast automatically.