Thomson T32E53U - Инструкция по эксплуатации - Страница 10

Advanced Functions

1 0

Note:

 Some options may be not available for certain 

signal sources.

DNR (Dynamic Noise Reduction)

: 

Improves the quality 

of the picture in the case of poor reception. Press the left 
or right direction button to toggle among 

Middle

, 

High, 

Low

 and 

Off

.

Smart Switch

:

 press the left or right direction button

to select a desired setting: 

Switch

, 

Display

 and 

Off

.

Note:

 For some models, this option is  not available.

Note:

  For HDMI source, the smart switch function is 

    available only when using a HDMI cable to connect the 
    equipment which turned on. And the smart switch function
    is not available for AV2 source, because AV2 shares video
    (Y/VIDEO) and audio sockets with YPBPR.

Display

: if an equipment, e.g. a DVD player, has been 

    connected to the sockets on the TV set and turned on, 
    e.g. AV1 sockets, the TV set will display a prompt 
    message on the screen. You can select OK to switch to 
    that signal source (AV1 for  this example) or Cancel to 
    ignore the prompt.

Off

:

disables the Smart Switch function.

Startup Setting: 

Sets the startup picture. You can set the 

Default or captured picture as open picture. 

Switch

: if an equipment, e.g. a DVD player, has been 

    connected to the sockets on the TV set and turned on, 
    e.g. AV1 sockets, the TV set will switch to that signal 
    source automatically (AV1 for this example). 

For example, if you want to set a family photo as the 
startup logo: 
1. Connect a USB device to a USB socket and show the 
    photo. 

2. Press 

Menu

 to display the play console, and 

use the 

 direction button

 to select 

Capture

 icon, then 

    press 

OK

 to capture the photo.

3. Press 

the up

 direction button

 to select 

LOGO1

    and press 

OK 

to confirm.

4. Activate 

Startup Setting

 and select 

LOGO1

,

 then

    press 

OK

 to confirm. The TV will automatically display 

    the captured picture when turning on.

Go to page 12 for specific instructions.

left 

    or right

 or down

Note:

 The 

LOGO1

 item is only available when capturing a 

    picture and if selecting 

LOGO1

, the TV will automatically 

    display the captured picture when turning on. If 

Off

    selected, the TV will not display any picture when turning 
    on.

Adjusting the Sound

Display the menu by pressing the 

Menu

 button. Press 

the left or right direction button to select the 

Sound

 icon 

and press the

 or down direction or 

OK

 button to display

the 

Sound

 menu. The 

Sound

 options are as below: 

Sound Mode:

 use the

direction or 

OK

through the sound preset settings: 

 up

 right

Stereo

, 

Music

, 

Movie

,

 News

 and 

Personal

.

 button 

to 

display the selectable options,  then press the up or down 
direction button to scroll 

Note

: If the 

Sound EQ

 is adjusted, the 

Sound Mode

   will automatically switch to 

Personal

.

Balance

: use the 

 direction button to balance 

the sound between the left and right speakers.

left or right

Scene:

 use the

direction or 

OK

through

 right

button to display the 

selectable options, then press the up or down direction 
button to scroll 

 the scene preset setting: 

DeskTop

, 

HangUp

.

Sound EQ: 

adjusts the audio frequency settings. Select 

the 

Sound EQ

 option, and press the right direction or 

OK

button to enter, then press the up or down direction button
to select an option and press the left or right direction  
button to adjust. 

Press 

Menu

 to return or 

Exit

 to close the menu. 

Function Settings

Display the menu by pressing the 

Menu

 button. Press the

left or right direction button to select the 

Setting

 icon 

and press the up or down direction or 

OK

 button to enter

the 

Setting

 menu.

 The 

Setting

 options are as below: 

Smart Volume:

 turns on this option to keep the same 

sound level for all channels. 

Sound

Sound Mode

Balance

Scene

Sound EQ

Smart Volume

Stereo

0

Off

DeskTop

Light Sensor: 

press the left or right direction button to

select 

On

 or 

Off

. When 

On

 is selected, the unit is in power 

saving mode and can automatically adjust the backlight 
according to the intensity of ambient light, the 

Back Ligh

t

option in 

Picture

 menu is not adjustable, the 

Natural Light

in 

Picture

 menu is automatically set to Off and not 

adjustable. When 

Off

 is selected, the 

Back Light

 and 

Natural Light

 options in 

Picture

 menu will restore to the 

user's setting.

DNR
Light Sensor
Smart Switch
Startup Setting
Language
Color System
Watch Time Limit
Time Setting 
Restore to Default

Setting

Light Sensor

Smart Switch

Startup Setting

Language

Color System

Watch Time Limit

Restore to Default

Off

Off

Default

English

Auto

DNR

High

Time Setting