Thomson T24E29U - Инструкция по эксплуатации - Страница 9

Note:

You are recommended to use the 

Full 

screen mode. 

Do not use the display mode with black bands on both 
sides of the picture (such as 

Standard

) for long time, 

otherwise the TV screen may be damaged permanently.

100

Standard

Full

50
50
50
50

0

Backlight

Picture Mode
Scale
Brightness
Contrast
Saturation
Sharpness
Hue

Picture

9

Swapping Two Channels

1. select 

the 

Cur. Channel

 option and press the left or right

 the 

Target Channel

 option and press the left or right 

 the 

Swap

 option and press the left, right 

Press the up or down direction button to 

    direction button to select a channel number.

2. Press the up or down direction button to select

direction button to select the channel number to be 

    swapped.

3. Press the up or down direction button to select

direction or 

OK

    button to swap.

Skipping a Channel

Advanced Functions

Chapter 3

General Operation

Adjusting the Picture

The menus for adjusting the picture are used to obtain the 
best picture setting according to your preference, the type 
of programme you are watching and the ambient lighting. 

Display the menu by pressing the 

Menu

 button. Press the 

left or right direction button to select the 

Picture

 icon and 

press the

 or down direction or 

OK

 button to enter

 up

the 

Picture

 menu. The 

Picture

 options are as below: 

Backlight

: this option can be used to adjust the 

brightness of the backlight, depending on room lighting. 
Use the left or right direction button to adjust.

Picture Mode: 

use the

direction or 

OK

 right

 button 

to 

display the selectable options, then press the up or down 
direction button to scroll 

through the picture preset 

Settings: 

User, Soft, Standard 

and

 Bright

,

 and press 

the right direction or 

OK

 button to confirm. 

Note:

 When selecting 

Standard

, 

Bright

, 

Soft

, the 

Backlight

 will restore to the defaulted setting in 

factory. You are recommended to use the 

Bright

 mode 

for vivid palette.

If a channel was stored twice or its reception is poor, you 
can simply skip it. The skipped channels can not be 
selected by pressing the 

CH +/- 

buttons.

1. select 

the 

Cur. Channel 

option and press the left or right

 the 

Skip

 option and press the left or right

Press the up or down direction button to 

direction button to select the channel number to be 

    skipped.

2. Press the up or down direction button to select

 direction button 

    to select 

Yes

.

3.  

Press 

Menu

 to return or 

Exit

 to close the menu.

Note:

 Some options may be not available for certain 

signal sources.

Scale:

 use the

direction or 

OK

through the picture size:

 Standard

, 

Full

, 

, 

Wide Screen

, 

Zoom

, 

Expand, 

button to display 

the selectable options, then press the up or down direction 
button to scroll 

Subtitle

 (

Note

: some options may be not selectable for 

certain signal sources.)

 And press the right direction or 

OK

button to confirm. 

 right

Original

 and 

Natural

.

Note: 

Hue is available to be adjusted only when the 

system of the video signal is NTSC.

Brightness: 

adjusts the brightness of the picture.

Contrast: 

adjusts the difference between the light and 

dark areas of the picture.

Saturation: 

adjusts the richness of color.

Sharpness:

adjusts the crispness of the edges in the 

picture.

Hue: 

adjusts the balance between the red and green 

levels.

Color Temp. (Color Temperature):

 adjusts the color 

temperature of the picture.  Use the

direction or 

OK

through 

.

 right

button to display the selectable options, then press the up 
or down direction button to scroll 

the color settings: 

Cool

 for a more blue palette of picture colors; 

Standard 

and 

Warm

 for a more red palette of picture colors

Dynamic Contrast

:

 turns on this option to adjust the

contrast automatically.

Light Sensor: 

press the left or right direction button to 

select 

On

 or 

Off

. When

 On

 is selected, the unit is in power

 saving mode and can automatically adjust the backlight 
according to the intensity of ambient light. Meanwhile, the

Backlight

 and 

Natural Light 

options in 

Picture

 menu are 

not adjustable. At the same time, the 

Natural Light

 is 

automatically set to 

Off

. When 

Off

 is selected, the 

Backlight 

and 

Natural Light

 options will be adjustable again. 

Note

: For some models, this option is not available.

.

Standard

Off

Off

Color Temp.

Natural Light

Light Sensor

Off

Dynamic Contrast