Telefunken TF-LED22S53T2 - Инструкция по эксплуатации - Страница 8

Operation

8

8

Operation

General operations

• Connect the plug of the power cord

to the power supply outlet, the power indicator 
will light showing that the unit is in standby 
mode. To switch on the unit, press POWER 
button on the panel or on the RC; when the TV 
is on, the power indicator is off. Press POWER 
button again to switch the unit to the standby 
mode, the power indicator will light up. To 
switch off the unit completely, disconnect the 
power cord plug from the power supply outlet.

• Press VOL- button on the unit or on

the RC repeatedly to decrease the volume; 
press VOL+ button on the unit or on the RC 
repeatedly to increase the volume.

• Press MUTE button to mute sound, press

this button again or adjust volume to resume 
sound.

• In TV mode press CH+/CH- buttons

to select previous or next channel; or press 
number buttons to enter a channel number 
directly.

• Press the DISPLAY button to display

the current TV channel information.

• Press SOURCE button, then press cursor

buttons on the RC to select a source from 
available source list: DTV => ATV => AV 
=>  SCART => YPbPr => PC => HDMI  => 
USB.

TELETEXT operations 

(option)

• Select the TV source mode. Then press

CH-/CH+ buttons to select TV channel in order 
to pick up the picture signal of Teletext.

• Teletext button functions are as follows:
TEXT: Press this button to enter into Teletext

mode. Follow the guides on screen and use 
the color buttons to navigate the Teletext.

Red/Green/Yellow/Blue buttons: Press 

these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.

REVEAL: press this button to display 

and reveal hidden information.
    MIX: press to display a TV signal 
together with Teletext or only Teletext.
    HOLD: press this button to stop the move 
to the next page. Press this button again to 
cancel operation.
    INDEX: press this button to go to the 
index page.
    SIZE: press to adjust the size of Teletext. 

• Use two AAA batteries for the RC. The RC

should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side.

• Take the battery out of the RC if it is not

used for a long time.

• Do not mix new and used batteries or

different types of batteries. Weak batteries can 
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,

and do not place it in an area with high 
humidity.

CAUTION!
Incorrect installation of the batteries may 

lead to an explosion.

Please replace used batteries with the 

batteries of the same or comparable type.