Telefunken TF-LED22S53T2 - Инструкция по эксплуатации - Страница 4

Before you start

4

4

Before you start

product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it 
moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left, and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the 
LED TV up or down display direction.

• Do not transport it with the power cord

or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, damaged power 
cord, connection cable or connection terminal 
may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.

All images provided herein are schematic 

drawings and may differ from real objects.

WARNING

In order to avoid damage, make sure 
to  secure  the  unit  on  the  wall 
according  to  the  wall  mounting 
instruction.

Wall or ceiling mounting implements 
must be durable and sufficient enough to 
support the weight of the unit.

Installation

Wall mounting

For wall mounting the back panel of this unit is 
equipped with a VESA slot. A 100*100 mm 
VESA wall-mount bracket should be used for 
wall mounting. The wall-mounting bracket is not 
included and should be acquired separately. 
Manufacturer is not responsible for improper 
mounting resulting in a damage to the unit.

Stand installation

Cover a flat stable surface with a soft cloth. 

Place the TV unit face-down on the cloth. 
Insert double support legs and fix them with 
supplied screws as shown below. Place the 
supplied protective caps on the edges of the 
legs.