Sony KDL-40(46)(52)Z4500 - Инструкция по эксплуатации - Страница 7

7

 GB

Start-up G

u

ide

If a message appears for you to confirm 
the aerial connection

No digital or analogue channels were 
found. Check all the aerial/cable 
connection and then press 

 to start auto-

tuning again.

8

When the Programme Sorting menu 
appears on the screen, follow the steps of  
“Programme Sorting” (page 46).

If you do not change the order in which 
the analogue channels are stored on the 
TV, press 

RETURN

 to go to step 9.

9

For details, see page 41.

10

For details, see page 30.
Following this step, GUIDE Plus+ setting 
screen appears only when GUIDE Plus+ 
is available.

11

Press .

The TV has now tuned in all the available 
channels.

~

• When a digital broadcast channel cannot be 

received, or when selecting a country in which 
there are no digital broadcasts in step 4, the time 
must be set after performing step 8.

To tune the TV for Cable connection

1

Press .

2

Press 

F

/

f

 to select “Quick Scan” or “Full 

Scan”, then press  .

“Quick Scan” 

: channels are tuned 

according to the cable operator 
information within the broadcast signal.
Recommended setting for “Frequency”, 
“Network ID” and “Symbol Rate” is 
“Auto.”
This option is recommended for fast 
tuning when supported by your cable 
operator.
If the “Quick Scan” does not tune, please 
use the “Full Scan” method below.

“Full Scan” :

 All available channels are 

tuned and stored. This procedure may take 
some time.
This option is recommended when “Quick 
Scan” is not supported by your cable 
provider.
For further information about supported 
cable providers, refer to support web site: 
http://support.sony-europe.com/TV/
DVBC/

3

Press 

f

 to select “Start”, then press  .

The TV starts searching for channels. Do 
not press any buttons on the TV or 
remote.

~

• Some cable providers do not support “Quick 

Scan.” If no channels are detected using “Quick 
Scan”, perform “Full Scan.”

To setup GUIDE Plus+ system (only 
when GUIDE Plus+ system is 
available)

*

* Condition you can setup this feature:

– in UK, Italy, Germany or Spain.
– you can receive digital broadcasting.
– when “Antenna” is selected in step 7 of “ 5: 

Performing the initial set-up.”

1

Enter Postal Code of region you live using 

F

/

f

/

G

/

g

/+.

~

• Enter from the left, when the postal code is 

fewer than seven digits.

Quick Start

Yes

No

Do you want to enable Quick Start?

T V turns on more quickly bu t stand by power

consumption is incre ased .

Control for HDMI

Yes

No

Do you want to enable control for compatible

HDMI devices?

Choosing "Yes" will increase

standby power consumption.

(Continued)