Samsung QE65Q7CAM - Инструкция по эксплуатации - Страница 38

Pairing the TV to the Samsung Smart Remote

When you turn on the TV for the first time, the Samsung Smart Remote pairs 
to the TV automatically. If the Samsung Smart Remote does not pair to the TV 
automatically, point it at the remote control sensor of the TV, and then press 
and hold the buttons labelled 

 and 

 as shown in the figure on the left 

simultaneously for 3 seconds or more.

Installing batteries into the Samsung Smart Remote

1. 

Press the   button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body 
cover.

2. 

Turn the remote over, and then slide the body of the remote upwards until the battery compartment is revealed.

3. 

Press the 

r

 and 

l

 buttons at both sides of the battery compartment to remove the existing batteries.

4. 

Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries' 
polarities (+, -) are oriented correctly. When done, slide the body of the remote until it is nearly in its original 
position.

5. 

Turn the remote over, press and hold the   button on the top rear, and then slide the body of the remote down 
into place.

•

Alkaline batteries are recommended for longer battery life.

English - 14