Panasonic TX-42CSR610 - Инструкция по эксплуатации - Страница 13

12

English

:  skip tuning

●

Auto Setup screen varies depending on the country 
and the signal mode you select.

●

[DVB-C Network Settings]
Normally set [Frequency] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter 
[Frequency] and [Network ID] specified by your cable 
provider with numeric buttons.

3

  Select the type of [Home Screen]

The demonstration to explain how to use [my Home 
Screen] is displayed. Follow the demonstration by 
following the on-screen instructions, and then select the 
desired [Home Screen].

Example: [Home Screen Selection]

Example: [TV Home Screen]

Auto Setup is now complete and the 
TV is ready for viewing.

If tuning has failed check the RF cable, and the network 
connection, and then follow the on-screen instructions.

Note

●

The TV goes into Standby mode when no operation 
is performed for 4 hours if [Auto Standby] in the Timer 
Menu is set to [On].

●

The TV goes into Standby mode when no signal 
is received and no operation is performed for 10 
minutes if [No signal Power off] in the Timer Menu is 
set to [On].

●

To retune all channels 

  [Auto Setup] in [Tuning Menu] (Setup Menu)

●

To add the available TV signal mode later 

  [Add TV Signal] in [Tuning Menu] (Setup Menu)

●

To initialise all settings 

  [Shipping Condition] in [System Menu] (Setup 

Menu)

First time Auto Setup

When the TV is turned on for the first time, it will 
automatically search for available TV channels and give 
options to set up the TV.

●

These steps are not necessary if the setup has been 
completed by your local dealer.

●

Please complete connections (p. 7 - 9) and settings 
(if necessary) of the connected equipment before 
starting Auto Setup. For details of settings for the 
connected equipment, read the manual of the 
equipment.

1

  Plug the TV into a live mains socket 

and turn the power on

●

Takes a few seconds to be displayed.

2

  Select the following items

Set up each item by following the on-screen instructions.

Example:

Please select your viewing environment.

Home

Shop

■

How to use the remote control

Move the cursor

Access the item / store the setting

Return to the previous item (if available)

Select the language
Select [Home]

Select [Home] for use in a home viewing environment.

●

[Shop] is for shop display.

●

To change the viewing environment later on, the set 
will need to have all settings initialised by accessing 
Shipping Condition.

Set up the network connection
Select your country
Tick the TV signal mode to tune, and then select 
[Start Auto Setup]

:  tune (search for the available channels)