Skil 8003 - Инструкция по эксплуатации - Страница 9

9

OTHER APPLICATION EXAMPLES:

         removing linoleum and vinyl carpeting

 removing carpet tiles made of synthetic fibres

         removing veneers/applying veneer strips

  softening/melting tar, tin, bitumen, wax (use flat 

nozzle E)

 waxing (skis, furniture) (use flat nozzle E)

⑫

         removing resin

          loosening rusty/too tightly fastened metal screws, 

nuts and bolts

          removing candle wax (

do not overheat the 

underlying surface

)

          repairing broken candles/restoring bent candles to 

their original shape

• 

Shrink fitting 

⑬

-

use reflector nozzle F or reduction nozzle G

-

select a shrink-fit tube with a diameter matching that of 

the workpiece

-

heat the shrink-fit tube evenly

OTHER APPLICATION EXAMPLE:

         shrink-wrapping

• 

Soldering water pipes 

⑭

This tool is most suitable for working with soft solders 

(melting point below 400°)

-

use reflector nozzle F

-

thoroughly clean both joining sections before soldering

-

pre-heat both sections and apply soldering wire (

do 

not use lead-based soldering wire

)

• 

Thawing out frozen water pipes 

⑮

-

use reflector nozzle F

-

heat the frozen area evenly

!

water pipes are often difficult to distinguish 

from gas pipes; heating gas pipes is extremely 

dangerous – risk of explosion

OTHER APPLICATION EXAMPLES:

          thawing out water pipes made of PVC (

position I, 

max. 70°C

)

          thawing out frozen car locks (

position I, max. 70°C

) 

(use reduction nozzle G)

          defrosting freezers (

do not damage the plastic 

housing

)

         thawing out ice-covered steps and pavements

• 

Shaping plastic tubes

-

use reflector nozzle F

-

fill the tube with sand and seal it at both ends, to avoid 

kinking of the tube

-

heat the tube evenly by moving it from side to side

OTHER APPLICATION EXAMPLES:

          shaping all plastics with a low melting-point 

(polyethylene, PVC etc.)

          shaping all plastics with a high melting-point (acrylic 

glass, Plexiglas etc.)

          shaping and bending carpet tiles made of synthetic 

fibres

         shaping and bending of wood (model-building)

• 

Welding plastics

-

the weld seam must be clean and grease-free

-

keep welding rod close to weld seam and apply heat, 

until the welding rod gets tacky

-

remove heat, when weld seam is filled up

OTHER APPLICATION EXAMPLES:

          repairing of surfboards, skis and other synthetic 

sports goods (use flat nozzle E)

         welding PVC-materials

         smoothening blisters after sticking PVC-labels

 connecting garden hoses (use reflector nozzle F)

• 

Drying

!

only dry with a low or medium temperature 

setting (position I or II) and with an increased 

distance between the tool and the workpiece

-

drying of paint, varnish, gypsum, mortar and plaster

-

drying wet timber prior to filling

-

drying thickly applied filler or adhesive quickly

-

drying building joints before spraying insulation or 

sealant

-

drying joints and cracks in boatbuilding

• 

Cleaning/disinfecting

-

disinfecting rabbit hutches, dove cotes, etc. (

remove 

your pet first

)

-

combatting ant colonies

-

combatting woodworms and boring beetles (

hold the 

tool at an adequate distance from the wood

)

-

eliminating weeds

MAINTENANCE / SERVICE

• 

This tool is not intended for professional use

• 

Always keep tool and cord clean (especially ventilation 

slots C 

②

)

• 

Never use easy inflammable liquids for cleaning the heat 

gun in general and the air outlet/nozzle in particular

• 

If the tool should fail despite the care taken in 

manufacturing and testing procedures, repair should 

be carried out by an after-sales service centre for SKIL 

power tools

-

send the tool 

undismantled

 together with proof of 

purchase to your dealer or the nearest SKIL service 

station (addresses as well as the service diagram of 

the tool are listed on www.skil.com)

ENVIRONMENT

•  Do not dispose of electric tools, accessories and 

packaging together with household waste material

(only for EU countries)

-

in observance of European Directive 2012/19/EC 

on waste of electric and electronic equipment and 

its implementation in accordance with national law, 

electric tools that have reached the end of their life 

must be collected separately and returned to an 

environmentally compatible recycling facility

-

symbol 

⑯

 will remind you of this when the need for 

disposing occurs

 DECLARATION OF CONFORMITY 

• 

We declare under our sole responsibility that this 

product is in conformity with the following standards 

or standardized documents: EN 60335, EN 61000, 

EN 55014, in accordance with the provisions of the 

directives 2006/95/EC, 2004/108/EC, 2011/65/EU