ARDESTO WMS-7117IWBD - Инструкция по эксплуатации - Страница 57

EN

21

Maintenance

When washing machine is frozen

1.Cover stopcock and the universal coupling with hot towel.
2.ake off the inlet pipe, and put it into 50 degree water.
3.Pour into the drum about 2-3L of 50 degree water.
4.Connect inlet pipe, turn on the stopcock and start the washing

machine, please check whether inlet and outlet is normal.

Faucet

Connecting

part

Inlet

pipe

a

.

50 degree 
water

c

.

 Pour into the drum 

about 2-3L of 50 
degree water.

Ake off the inlet pipe, 
and put it into 50 
degree water.

b

.

50 degree 
water

The Clearance of dewatering-pump filter( Suggest: once/monthly)

1.Press fastener on the pump after dewtering and power off, open the

lid of water-pump filter.(Attention: if hot water inside, please go
ahead after it be cold.)

2.Take off  the filter anti-anticlockwise.
3.Wash the filter.
4.Direct at pump and insert the filter, tighten it clockwise and tighten

the lid.

Attention:  a. Please tighten the filter well to avoid leak.

b. Please do not clean during operation.

The Drum Clearance (Suggest once/monthly)

After using for a period, some dirt maybe exist. You can clean the 
inside and outside of drum by operating the drum procedure.
Attention: please do not put cloths and detergent when clearing the 
drum.

Varieties of Functions

1.  Child Lock function: You can lock and unlock the child lock 

function by pushing «Delayed Start» 3 seconds when the 

machine is running.

•  Once the child lock function set, all the other buttons will be 

locked except the power button.

•  When the washing process ending or push “Power” button or 

default warning, the child lock function cannot be unlocked. 

It means that the child lock function must be unlocked by 

hand. When the power on and start the machine, if the child 

lock function is going on (the lamp of child lock light up, you 

need to push «Delayed Start» button for 3 second to unlock the 

child lock function and then continue to operate the washing 

machine.

2.  Power-off Memory: When there is power on again after a period 

of power-off, the machine will continue the working process at 

the time node of last power-off action.

3.  Door self-lock: After selecting procedure, the door locked 

automatically, 2 minutes after operation over, lock removed.

4.  Tub clean: The program of drum clean is use the high water 

level, high water temperature, high speed to clean the drum 

and kill the bacteria. 

5.  Add garment function: During the process running, if you 

want to add garment, please push «Start/Pause»button to stop 

running;

•  After around 5 seconds, it has a sound of unlocking, meanwhile 

the door lock mark in the screen disappear then you can open 

the door.

•  Add the additional garment into the drum(Don’t let the door 

clamp clothes, this will cause failure of leakage and error).

•  Forced to open the door part, damage may occur, such as safety 

problem. When there are many bubble in the inner barrel and 

plenty of water, open the door, water and foam will flow out .

•  When the inner drum is running, it is in danger status since the 

temperature of water is above 45C and there is plenty of water 

inside. At this time, the door can not be forced to open. If want 

57