ARDESTO WMS-7117IWBD - Инструкция по эксплуатации - Страница 41

EN

Requires for positions

Horizontal adjustment:

The slant angle should be less than 1 degree.

Power outlet

The distance between any side of washer and 

   power outlet should be within 1.5 meters.

Don't use too many electrical appliances 

   in one outlet.
Environment cleaning

It's necessary to clean the wall, door and ground. 

Install the washer on a hard and steady ground with floor drain rather 

   than soft blanket or wooden floor.

Don't put dirty clothes or some other goods on a washer's head cover, 

   otherwise it may impact the normal operation.

Notice 

Power connection

1.Don't use the wiring board or something like that.
2.If the power lines are damaged, please contact professionals to repair.
3.After the use of washer, pull the plug and turn the tap off.
4.Connect the washer with grounded outlet to correspond to the wiring 
   principles.
5.Place the washer in which is easy to connect the outlet.
   Contact the maintenance center and ask professionals to repair the 
   washer. Laypeople may cause damages and troubles on the washer. 
   Don't put the washer in the place where the temperature is below zero. 
   The pipes will be frozen and break. Moreover, the temperature below 
   zero will damage the programming controller.
   If move the washer in an environment whose temperature is below 
   zero, please keep the washer at room temperature for a few hours 
   before starting it.

Grounding introduction

A washer must have the grounding devices. If a trouble happens, the 

   device can reduce the risk of electrical shock. The device is equipped 
   with a cable (including a wire and a grounded plug). The grounded plug 
   must be inserted in an appropriate outlet. If you want to know if the 
   washer is grounded correctly, please contact with professional 
   maintenance staff. If the plug can't match with the outlet, please don't 
   change the plug by yourself.
   Once your washer smokes or emits an odor, please cut the power and 
   contact with professional maintenance staff.

Drain

pipe

Wash

tub

Abo ut 2

cm

Requires for positions

The device must be installed on a solid, dry, clean, level surface.
Horizontal adjustment:

•  The slant angle should be less 

than 1 degree. 

Power outlet

•  The distance between any side 

of washer and power outlet 

should be within 1.5 meters. 

•  Don’t use too many electrical 

appliances in one outlet. 

Environment cleaning

•  It’s necessary to clean the wall, door and ground.

•  Install the washer on a hard and steady ground with floor 

drain rather than soft blanket or wooden floor.

•  Don’t put dirty clothes or some other goods on a washer’s 

head cover, otherwise it may impact the normal operation.

Notice

Power connection

1.  Don’t use the wiring board or something like that.

2.  If the power lines are damaged, please contact 

professionals to repair.

3.  After the use of washer, pull the plug and turn the tap off.

4.  Connect the washer with grounded outlet to correspond 

to the wiring principles.

5.  Place the washer in which is easy to connect the outlet.

•  Contact the maintenance center and ask professionals 

to repair washer. laypeople may cause damages and 

troubles on the washer.

•  Don’t put the washer in the place where the temperature 

is below zero. The pipes will be frozen and break. 

Moreover, the temperature below zero will damage the 

programming controller.

•  If move the washer in an environment whose temperature 

is below zero, please keep the washer at room temperature 

for a few hours before starting it.

41