Zanussi FE 1014 N - Инструкция по эксплуатации - Страница 17

ENGLISH

17

9. Start the programme

Press the START/PAUSE button. The relevant light
will stop flashing, the DOOR LOCKED light will light
up, and only the light relevant to the phase that is in
progress will remain lit.

10. How to change a programme 

during its cycle

Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the washing machine will resume the cycle

from the

beginning

.

If it is necessary to drain the water in order to
change the programme in progress, proceed as
follows:

• PAUSE the machine by  pressing the

START/PAUSE button;

• press  the RESET button repeatedly, until 

only the DRAIN light 

remains lit;

• press the START/PAUSE button again.

When the water has been drained, you may select a
new programme and press the START/PAUSE
button to start it.

S TA RT/PAUS E

7. Select the spin speed or the 

RINSE HOLD option

Press the SPIN SPEED button repeatedly, in order
to select the desired spin speed or the RINSE HOLD
option. The relevant light will light up.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.

8. Select the desired options

If your laundry is very dirty, it may be advisable to
select the PREWASH option.
If you wish the laundry to undergo an extra rinse,
select the SUPER RINSE option.
Press the OPTIONS button so as to cause one or
both of the lights to light up.

Select the QUICK WASH option, if your laundry is
only slightly soiled. The relevant light illuminates. 

O P T I O N S

PREWASH

SUPER
RINSE

QUICK

S

P I N

S P E

E D

1000

900

700

500

RINSE
HOLD