Zanussi FE 1014 N - Инструкция по эксплуатации - Страница 16

4. Switch the machine on

To switch the machine on, press the ON/OFF button

: the mains-on light comes on.

5. Select the desired programme/

fabric

Press the FABRIC button repeatedly, in order to
select the desired programme/fabric. The relevant
light will light up.

The lights relevant to the phases that form the
programme will light up.

The START/PAUSE button light will start flashing.

6. Select the temperature

Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the washing machine. 
The relevant light will light up.

60°C

40°C

95°C

30°C

T

E

M

P E R A T

U

R

E

COLD

SYNTHETICS

DELICATES

 COTTONS

WOOL

F A B R I C S

ON / OFF

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,
shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment 

.

If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked 

.

3. Measure out the additives

If required, pour fabric softener into the
compartment marked 

without exceeding the

«MAX» mark.

C0071

C0070

P0004

16