Zanussi FE 1014 N - Инструкция по эксплуатации - Страница 12

Example:

In this case, the spin

(at the speed provided
for the selected type of
fabric) will be
performed.

This button allows you also to select special
programmes, such as 

RINSES

, 

SPIN

and 

DRAIN

.

• 

If the machine is already switched on

because it

has just performed a washing programme, proceed
as follows:

- depress RESET once or repeatidly to cancel the

previously performed programme (all the phase
indicator lights must be off);

- select the type of fabric by means of the relevant

button;

- select the special programme:

• 

RINSES AND SPIN

Depress RESET 

once

, the pilot light 

(WASH)

goes out.

• 

SPIN

Depress RESET 

twice

, the pilot lights WASH 

and RINSES 

go out.

• 

DRAIN

Depress RESET 

three times

, the pilot lights

WASH 

, RINSES 

and SPIN 

go out.

Example:

In this case the
machine will perform
the rinses and spin.

• 

If the machine is switched off:

-  depress ON/OFF button to switch it on;

-  select the type of fabric by means of the relevant

button:

-  select the special programme as previously 

described.

9 Programme phase indicator
lights

When you select a programme, the lights relevant to
the phases that form the programme light up.

After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.

At the end of the programme the pilot light 
illuminates.

If the light 

lights up at the end of the programme

this means that the drain filter is clogged.

The END

pilot light flashes in the event of

operating problems.

At the same time one of the following lights starts to
flash:

= the machine does not fill

= the machine does not empty

= the door has not been closed

To eliminate the problem, see paragraph
“Something not working”.

PREWASH

WASH

RINSES

RINSE HOLD

SPIN

DRAIN

FILTER

END

12