Kuppersberg WD 1488 - Инструкция по эксплуатации - Страница 24

24

TECHNICAL PASSPORT

ENGLISH

Washing Dryer Machines



Select the degree of dryness that 

you require:

 EXTRA DRY

(suitable  for  towels,  bathrobes  and 

bulky loads).

 IRON DRY

(that  leaves  the  laundry  ready  for 

ironing).

 CUPBOARD DRY

(for  items  that  will  be  put  away 

without ironing).



The washer dryer will calculate 

the time needed for drying and the level 
of moisture remaining in the laundry, 
according to the load and drying type 
selected.



Check that the tap is turned 

on and that the discharge hose is 
positioned correctly.

 WARNING:

Do not dry woollen garments or 

articles  with  special  padding  (e.g. 

quilts, quilted anoraks, etc.) and very 

delicate fabrics. If garments are drip/ 

dry, load less items as to prevent 

creasing.



Press  the  START/PAUSE  button 

(the  display  will  show  the  drying  time 
remaining).

The appliance calculates the time to the 
end of the selected programme based 
upon a standard loading. During the 
cycle, the appliance corrects the time 

according to the size and composition 
of the load.

During the drying phase the drum 
will accelerate to a higher speed to 
distribute the load and to optimize the 
drying performance.



When the programme is fi  nished 

the word «End» will appear on the 
display. After 5 minutes the appliance 

will  go  into  standby  mode  (on  certain 
models, the display will show two lines). 



Switch  off  the  machine  by 

turning the programme selector to the 
OFF position. 



Open the door and remove the 

laundry. 



Turn off the tap.

CANCELLING THE DRYING 
PROGRAMME



To cancel the drying programme, 

press and hold the DRYING SELECTION 

button for about 3 seconds.

 WARNING:

After cancelling the drying 

programme, the cool down phase 

will  begin  and  you  must  wait  for 

about 10/20 minutes before opening 

the door.

In order to ensure the correct operation 
of the appliance, it is advisable not to 
Interrupt the drying phase unless it is 
absolutely necessary.